Articles techniques et présentations

This talk is for intermediate-level users of COMSOL who, like the present author, are relative newcomers to numerical simulation but have a strong grounding in Hydrodynamics or related areas of Mathematical Physics. Most turn-key Computational Fluid Dynamics packages, including COMSOL ... En savoir plus

In this study the inverse Jet-ECM process of micro bores is investigated by help of multiphysics simulations. Based on the micro bore of a commercial sample nozzle a model geometry was derived. For simulating inverse Jet-ECM a transient model has been developed. Electric currents and ... En savoir plus

In this work, a MEMS based condenser microphone [1,2] using Polyimide as the diaphragm has been designed. The microphone structure has a backplate placed on top of the diaphragm. The backplate and the diaphragm are made up of polyimide. The two polyimide plates are separated by air gap ... En savoir plus

This paper presents the design and simulation of micromixer for Lab-On-Chip (LOC) applications. There are two types of micromixers: one is an active micromixer and another one is a passive micromixer. This paper investigates microfluidic flow characterization and mixing rate of two ... En savoir plus

For the SAFARI Imaging Spectrometer, part of the SPICA satellite payload, a Calibration Source is under development. Challenges in the design include the low cooling power (few mW) available at cryogenic temperatures. COMSOL Multiphysics® simulations were used extensively in the design ... En savoir plus

Analytical methods used for inductance calculation of toroidal coils yield large errors in the case of coils sparsely wound on low permeability cores. Numerical field calculations can provide “exact” figures. We have outlined several simulation methods. Simplifications, assumptions, and ... En savoir plus

In a commercial 3D printer head, plastic ribbon passes through a hot nozzle of an extruder to dispense liquid plastic droplets to construct the model. In this paper a 2D axisymmetric model of a 3D head is considered to study the secondary transition change from below the glass ... En savoir plus

The JPM Silicon GmbH presents a novel method for the production of solar grade silicon in the microwave oven. This method can specially reduce the energy costs and increase the efficiency of the process. A numerical model is developed which depicts the physical, chemical and ... En savoir plus

The Thomson coil’s (TC) inherent characteristics are appropriate to meet the needs of high speed actuators for mechanical switching devices in so-called smart grids. This is due to the massive forces that it can exert in the time scale of milliseconds. A coupled COMSOL Multiphysics model ... En savoir plus

Introduction: Medium voltage reclosers are representing nowadays an important link between transmission power systems and low voltage grids. With a high level of renewable energy penetration, the medium voltage networks are becoming bidirectional. Therefore, the associated switching ... En savoir plus