- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Arc current welding is a widespread process in heavy industry for the assembly of metallic components. In order to ensure the good quality of assemblies welds, it is appropriate to master the welding process but also to have a deep understanding of interactions with the weld pool and ... En savoir plus
It was suggested long ago that a theoretical model of a near-cathode region in a DC glow discharge admits multiple steady-state solutions describing different modes of currrent transfer. Even the most simple self-consistent models should admit such multiple solutions. In the present ... En savoir plus
A horizontal array of Si microlines (line width ~1 µm) was formed on a Silicon-on-Insulator (SOI) wafer [1] and was used as a photodetector to study the photoresponse in the wavelength range 400 nm to 1100 nm. The fabrication of partial suspended Si microstructure array was made using a ... En savoir plus
Current transfer from high-pressure arc plasmas to thermionic cathodes may occur in a diffuse mode, when the current is distributed over the front surface of the cathode, or in a spot mode, when most of the current is localized in one or more small areas. Spectra of perturbations of 3D ... En savoir plus
The well known Pierce design of electron and ion diodes is the base of particle source extraction systems [1,2]. It was heavily studied up to 1960 with analog computing and it now offers us a known case against which to compare the precision of fluid and particle tracing codes. The ideal ... En savoir plus
Divertor is act as an exhaust for the nuclear fusion reactor. Main function of a divertor is to remove the heat flux from the plasma. Plasma facing components of the divertor are made up of Carbon (Graphite/CFC) and tungsten like materials[1]. Hence these materials are exposed to the ... En savoir plus
Hemolysis caused by flow-induced mechanical damage to red blood cells is a concern in devices that involve transporting blood. Mathematical models have been proposed to estimate red blood cell damage in blood flow. We used hemolysis mathematical models to evaluate the effect of ... En savoir plus
Pseudospark (PS) discharge is a low pressure hollow cathode discharge for generation of high intensity and high current density electron beams [1-3]. As the frequency of the microwave devices increases, the dimensions of the beam-wave interaction region gets reduced. In THz frequencies, ... En savoir plus
Recent developments (1) in thermal metamaterials that enhance the response of thermoelectric generators (TEG) have revived the interest in TEG research. The COMSOL Multiphysics® software offers the unique opportunity to model TEGs with various cooling systems (air, water, etc) and ... En savoir plus
The design and analysis of a multidimensional system involving multiphysics considerations requires solving of complex equations. A high power continuous wave RF component is one such system. The poster reports the design, multiphysics analysis, low and high power experimental results of ... En savoir plus