- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
This paper explores the complexities of a dragonfly's flapping wing motion. It includes the literature as well as analytical results using simulations done in COMSOL Multiphysics® software. The study depicts the Fluid-Structure Interaction of the 2D wing (airfoil) with air, governed by ... En savoir plus
The high flow rate within the HFIR cooling water flow channel causes the fuel plates to deflect which in turn, changes the coolant flow characteristics. This nonlinear feedback loop between the coolant and the fuel plate is the focus of the present simulation of the fluid-solid ... En savoir plus
The approach of this project is Modeling a Coriolis Mass Flow-meter (CMF) bases on a Fluid-Structure Interaction (FSI) device. The "Coriolis mass flow-meter sensor" is modeled using COMSOL Multiphisics® simulation, the Acoustic-Shell Interaction physics interface and coupled by FSI ... En savoir plus
The Leidenfrost effect occurs when a droplet approaches a surface with a temperature much hotter than the boiling point of the liquid. Here, the underside of the droplet is instantly vapourised, allowing it to sit on a cushion of its own vapour, which grants the droplet virtually ... En savoir plus
In this research, we performed multiple COMSOL Multiphysics® simulations. We analyzed the dispersion curves of waves in a LAMB wave pressure sensor; simulated a thin metal film in a microbolometer and observed the resulting stress; investigated the thermal behavior of an acoustic wave ... En savoir plus
The numerical results of the unconfined compression test on a sample of Articular Cartilage (AC) are discussed. AC is modelled as a load-bearing, deformable, fiber-reinforced material filled with an interstitial fluid and comprising statistically oriented collagen fibers, chondrocytes, ... En savoir plus
INTRODUCTION: Perfectly matched layers (PML) have been widely used for simulating wave propagation in unbounded media to effectively avoid spurious wave reflections from the computational domain boundaries. Time-domain PML formulations, especially for elastic waves, usually use a complex ... En savoir plus
In this work, a new design is suggested which functions both as a pipe for fluid transfer and as a valve which decreases the flow of the fluid in the opposite direction in case there are pressure fluctuations in the pipe. Therefore, we call it a "Deformed Valve". To design the structure, ... En savoir plus
Microalgae biomass is an essential part of the global ecosystem. Not only is it responsible for 50% of the global oxygen but also proved to be useful in the development of organic polymers, antioxidants, pharmaceuticals, and feedstocks for aquatic animals. It is considered as an ... En savoir plus
In this paper simulation and parametric study of a PDMS valveless micropump using Fluid-Structure Interaction (FSI) appraoch is presented. The simulation for the valveless micropump were carried out in COMSOL Multiphysics software. In case of a valveless micropump diffuser/nozzle element ... En savoir plus