- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Magnetorheological Finishing (MRF) is one of the precision finishing processes in which magnetic field is used to drive abrading forces for Finishing 2D and complex 3D surfaces. In this paper, Ball End Magnetorheological Finishing (BEMRF) has been analyzed for fluid behaviors under the ... En savoir plus
The machining of hardened steel or powder metallurgical steel, for example to manufacture impact extrusion punches, is a big challenge for conventional machining technology as milling or turning. A non-conventional machining technology is Electrochemical Machining (ECM), which allows ... En savoir plus
Electrowetting on Dielectric (EWOD) is a versatile tool for performing basic operations in Digital Microfluidic Systems. In EWOD, surface tension between a liquid droplet and solid substrate is modulated by applying voltage to an electrode and a hydrophobic surface is transformed into a ... En savoir plus
Possible drawbacks of microreactors are inefficient reactant mixing due to the predominance of laminar flow and clogging (when solid-forming reactions are performed or solid catalyst suspensions are used). Ultrasound has been successfully implemented not only to prevent these problems ... En savoir plus
An implementation of the Electrical Impedance Tomography (EIT) forward problem in a generalist FEM package is presented. It fulfils the complete electrode model boundary conditions, combining current injection with contact impedance on a single boundary. Our implementation is benchmarked ... En savoir plus
Mutual Inductance based Level sensor has been proposed for high temperature (1000 C) molten metal applications. Modelling and Simulation studies are done using COMSOL Multiphysics® to obtain optimum sensor design, excitation frequency and sensor characteristics. Further temperature ... En savoir plus
The attempt has taken to miniaturized size of non contact temperature sensor by using ultrasonic trans-receiver. The piezoelectric material is used in both transmitter and receiver ends for this ultrasonic Micro-Electronics Mechanical Systems (MEMS) based temperature sensing device. ... En savoir plus
Single-phase fluid flow was simulated passing through various three dimensional pipe elbows. The simulations varied by Reynolds number, curvature ratios, and sweep angles and were all conducted using the k-ε model available in COMSOL Multiphysics® software. The intent of this research ... En savoir plus
This paper presents a study of a wind turbine subjected to wind and seismic loading, carried out using COMSOL Multiphysics. The dynamic properties and response of wind turbine structures are of interest, as recent developments in wind energy have led to the design and construction of ... En savoir plus
Fluorescence Diffuse Optical Tomography (FDOT) uses Near Infra-Red (NIR) light to monitor physiological changes in internal organs. NIR light being less energetic in nature can be used for continuous monitoring of tumor infected biological tissue, neonatal brain and many such ... En savoir plus