- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
In this paper, the cyclic voltammetry behavior of Ferrocyanide/Ferricyanide, which is commonly used for electrochemical DNA detection experiment, was studied in the commercial EQCM-D setup (Q-sense) using the COMSOL Multiphysics. The model was established in a 3D geometry of QCM liquid ... En savoir plus
A 3D finite element model (FEM) of the PEMC sensor was developed to characterize the modes of vibration that have demonstrated high sensitivity to mass-change in experimentally fabricated sensors. The fundamental bending mode of vibration and the 1st bending harmonic are predicted at 10 ... En savoir plus
The Purpose of this paper is to develop a thermal model using COMSOL Multiphysics® software that aims to get an idea of the heat flow around the ASIC, as well as to address the thermal issues for integrated circuits at the tongue board. However, we need sources of heat simulations to map ... En savoir plus
We propose the study of an electronic sensor allowing the collection of sprays in free space. The detector consists of three elements: a photodiode situated in the center of the structure to which is applied a bias voltage, an aluminum ring which referenced to a voltage higher than that ... En savoir plus
Blind cave fish are capable of sensing flows and movements of nearby objects even in dark and murky water conditions with the help of arrays of pressure-gradient sensors present on their bodies called lateral-lines. To emulate this functionality of lateral-lines for autonomous underwater ... En savoir plus
We present time-resolved methods that rely on near-infrared photons to image the optical properties and distribution of fluorescent probes in small laboratory animals. The coupled diffusion equations of excitation and fluorescence photons in highly scattering tissues were solved using ... En savoir plus
Human made mechanical resonators have been around for a thousand years. Early applications included musical instruments and chronographs operating in millihertz to kilohertz frequencies while more recent interest has turned ultra-high frequency resonators and oscillators suitable for ... En savoir plus
Surface-enhanced Raman spectroscopy (SERS) has been developed as a versatile tool for trace-molecule detection and biomolecular analysis by coupled gold or silver nanostructures in the past two decades. However, SERS suffers from a long-term limitation of application for surface analysis ... En savoir plus
The objective of this study is to determine the locations where liquid water accumulates at cathode gas flow channels, and the corresponding operating conditions. In such way it is possible to mitigate slug flow, responsible for channel blockage and hindering the diffusion of reactants ... En savoir plus
Nuclear Quadrupole Resonance (RQN) is a radio frequency (RF) spectroscopic technique that is used to detect quadrupole nuclei such as Nitrogen-14. NQR was found to be a good candidate for detecting narcotics, explosives and medicines [1]. However, due to its low sensitivity the use of ... En savoir plus
