Articles techniques et présentations

Electric Arc Furnaces (EAF) use graphite electrodes to strike an arc to melt scrap steel, recycling it for further use. These graphite electrodes oxidize and are consumed over time. To maintain operation new electrodes are attached to others via a joint of complex geometry and fed ... En savoir plus

The main objective of this study is to verify the compliance of an ongoing nuclear facilities stack design with the ISO 2889 requirements, during normal and off-normal conditions. In particular, with the numerical simulations, they have been identify well-mixed sample locations along the ... En savoir plus

COMSOL Multiphysics® software was used in this study to simulate mixing by diffusion and by secondary flow. Particle tracing model was applied to simulate the mixing of cells in the microchannel. Results agreed well with the measurement, an optimal herring-bone structure was proposed for ... En savoir plus

We present a novel method for concentrating and focusing small analytes by taking advantage of the nonuniform ion distributions produced by thick electric double layers (EDLs) in nanochannels with heterogeneous surface charge. Specifically, we apply a voltage bias to a gate electrode ... En savoir plus

The anode baking process has gained significant attention since the 1980s due to its importance in Aluminium industry. A good anode baking process strives to achieve multiple goals including reduction of NOx from emissions. NOx generation is mainly due to the high-temperature ... En savoir plus

Introduction The topology optimization method is becoming increasingly popular as a design tool for multiphysics systems [1,2]. Topology optimization of fluid-thermal systems has been presented for example in [3] for forced convective heat transfer and in [4] for natural convection ... En savoir plus

Impact of human activities on the climate is evident, and the recent anthropogenic production and discharge of greenhouse gases into the atmosphere is highest in history. The current climate change have had worldwide influence on human and natural systems for example; global warming, ... En savoir plus

Unmanned aerial vehicles (UAVs) have recently received great interest due to their great potential in both military and civil applications [1-4]. Testing and construction of UAVs is expensive and time consuming and a simulation approach can help to reduce cost for both design and tests. ... En savoir plus

Continuous heat treatment is employed in food industry as a key step in the production of selected products, like dairy desserts. The evolution of an aqueous suspension of starch granules along an existing heat exchanger is here studied by 3D modeling of fluid flow, heat transfer and ... En savoir plus

The performance of a PEMFC depends on several factors, including the flow inside gas channels. Low gas velocity inside the channel can make water management more difficult, possibly causing water to accumulate and condense in certain regions of the cell. In the present work, COMSOL ... En savoir plus