Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Computation of Capacitance, Inductance, and Potential Distribution of Integrated-Circuit Interconnects for Unshielded Four Conductors with Three Levels Systems

S.M. Musa[1], M.N.O. Sadiku[1], J.D. Oliver[1]
[1]Prairie View A&M University, Prairie View, TX, USA

In this paper an attempt has been made to design and analyze integrated circuit interconnects for unshielded four conductors with three levels system using Finite Element Method (FEM). The computational and simulation work has been carried out with help of COMSOL Multiphysics software. ... En savoir plus

Equation-Based Modelling: True Large Strain, Large Displacement and Anand's Plasticity Model with COMSOL's Moving Mesh Application Mode

O. Toscanelli[1], V. Colla[1], and M. Vannucci[1]

[1]Scuola Superiore S. Anna, Pontedera, PI, Italy

In this work the solution of the structural problem obtained by mean of the velocity approach is presented. More in detail the balance and constitutive equations are expressed in Eulerian form, the mesh is not material. The approach is general, is suitable both for material boundary or ... En savoir plus

Irrotational Motion of an Incompressible Fluid Past a Wing Section in an Unbounded Region

J. Russell[1]
[1]Florida Institute of Technology, Melbourne, FL, USA

Developers of numerical models who address the title problem face several hurdles, such as: (1), the need to formulate boundary conditions applicable in an unbounded region; (2), The need to specify conditions suitable to ensure a unique solution in a doubly connected region; and (3), ... En savoir plus

The Application of Low Temperature Plasma in COMSOL Multiphysics

Cheng-Che (Jerry) Hsu[1]
[1]Department of Chemical Engineering, National Taiwan University, Taipei, Taiwan

Multiphysics simulation was used in this work to model inductively coupled plasmas (ICPs). Developing a model of an ICP is challenging due to the complex relationship between the applied electric field and mixture of chemical species that develops. A preliminary model was developed and ... En savoir plus

Simulations of Negative Curvature Hollow-core Fiber

J. Zhang[1], Z. Wang[1], J. Chen[1]
[1]College of Optoelectronic Science and Engineering, National University of Defense Technology, Changsha, Hunan, China

COMSOL Multiphysics® software was used to simulate and analyze the transmission attenuation spectra of the negative curvature hollow-core fiber (NCHCF) over the wavelength from 2.7 μm to 4.2 μm. The effect of thickness of capillaries and the effect of the distance between the capillaries ... En savoir plus

Proof of Concept and Properties of Micro Hydraulic Displacement Amplifier

R. Zhu[1], A. Malisauskaite[1], U. Mescheder [1], U. Wallrabe[2]
[1]Hochschule Furtwangen University, Furtwangen, Baden-Württemberg,Germany
[2]Institut für Mikrosystemtechnik (IMTEK), Freiburg, Baden-Württemberg, Germany

Nowadays, mathematical models have been widely applied in varies fields; especially in fluid mechanics and nonlinear material which are very complex or even not possible to be calculated using analytical methods. In this paper, a hydraulic displacement amplifier coupled with fluid ... En savoir plus

Skewing For Both Cogging Torque Components In Permanent Magnet Machines

D.R. McIntosh
Sonsight Inc., Accokeek, MD, USA

The current paper describes how a properly chosen skew angle can be used to significantly decrease the amplitude of the high and/or low frequency cogging torque components. The approach is further demonstrated with the help of FE results from COMSOL Multiphysics. The numerical analyses ... En savoir plus

Deformation Behavior Of A Liquid Droplet Impacting A Solid Surface

S. Oukach[1], M. Elganaoui[1], B. Pateyron[1], and H. Hamdi[2]
[1]Laboratoire des Sciences des Procèdes Céramiques et de Traitements de Surface SPCTS, Limoges, France
[2]Laboratoire de Mécanique des Fluides et Energétique LMFE, Marrakech, Morocco

The quality of coatings obtained by means of thermal spraying depends strongly on the mechanism of the interaction between the molten droplets and the surface to be covered. The aim of the present study is to simulate the impact of a droplet onto a substrate, in order to have a good ... En savoir plus

Propagation Of Tsunamis Over Large Areas Using COMSOL

C. Cecioni, and G. Bellotti
University of Roma TRE, DSIC, Rome, Italy

This paper presents a numerical model based on the mild-slope equation (MSE for short) solved using the PDE mode of the software COMSOL Multiphysics suitable to reproduce the propagation of small amplitude tsunamis in the off-shore field. The model solves the governing equations in the ... En savoir plus

Analysis and Design of Electromagnetic Pump

V. Teotia, S. Malhotra, K. Singh, and U. Mahapatra
Bhabha Atomic Research Centre, Mumbai, Maharashtra, India

Liquid metal loops are used for heat removal and for the study of certain magneto-fluidic phenomenon like MHD (Magneto-Hydro Dynamic) effects. These loops operate at high temperatures and carry fluids that are invariably toxic in nature. Ensuring the purity of fluid in a closed loop ... En savoir plus

Premier

201–210 of 223

Dernier