Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Mathematical Investigation and CFD Simulation of Monolith Reactors: Catalytic Combustion of Methane

M. Ghadrdan[1], and H. Mehdizadeh[2]
[1]Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU), Trondheim, Norway
[2]Department of Chemical Engineering, Tarbiat Modares University, Tehran, Iran

Interest in the production of hydrogen from hydrocarbons has grown significantly recently. In order to achieve high surface to volume ratio with reasonable pressure drop, monolithic reactors are used. The goal of this work is to develop a two-phase (gas & solid) transient catalytic ... En savoir plus

Effect of Bed Diffusion and Operating Parameters on Char Combustion in the Context of Underground Coal Gasification

S. Mahajani, and G. Samdani
Indian Institute of Technology Bombay
Mumbai, India

Char combustion is one of the most important reactions in the process of Underground Coal Gasification (UCG). Experiments are performed in a boat reactor under near isothermal condition to demonstrate effects of heat and mass transfer and bed diffusion through ash layer. To obtain a ... En savoir plus

FSI for Coolant Flow in Research-type Nuclear Reactors

F. Curtis[1], K. Ekici[1], and J. Freels[2]
[1]University of Tennessee, Knoxville, TN
[2]Oak Ridge National Lab, Oak Ridge, TN

The High Flux Isotope Reactor, located at the Oak Ridge National Laboratory, is scheduled to undergo a conversion of the fuel used and this proposed change requires an extensive analysis of the flow through the reactor core. The core consists of approximately 500 very thin and long fuel ... En savoir plus

COMSOL Multiphysics® Software: Simplifying Workflow and Promoting Innovations in Nuclear Engineering at ORNL

P. K. Jain [1], J. D. Freels [1],
[1] Oak Ridge National Laboratory, Oak Ridge, TN, USA

At Oak Ridge National Laboratory (ORNL), COMSOL Multiphysics® software has become a preferred software for certain multiphysics applications in nuclear engineering. This presentation will highlight some of the ongoing activities in the following areas: (1) Highly enriched uranium (HEU) ... En savoir plus

3D Dynamic Simulation of a Metal Hydride-Based Hydrogen Storage Tank

A. Freni, and F. Cipiti
CNR- Institute for Advanced Energy Technologies “Nicola Giordano”, Messina, Italy

In this paper, a 3D dynamic simulation for a portion of a metal hydride-based (LaNi5) hydrogen storage tank is presented. The model is based on heat and mass balances and considers coupled heat and mass transfer resistance through a non-uniform pressure and temperature sorbent bed. The ... En savoir plus

Inverse Method for Calculating the Temperature-Dependent Thermal Conductivity of Nuclear Materials

T. Pavlov[1,2], P. Van Uffelen[1], L. Vlahovic[1], D. Staicu[1], M. Wenman[2], R. W. Grimes[2], ,
[1]Institute for Transuranium Elements, Eggenstein-Leopoldshafen, Germany
[2]Department of Materials, Imperial College London, London, UK

The high temperature measurement of thermal conductivity is vital for predicting nuclear fuel performance both during reactor operation and accident conditions. The proposed method uses experimental thermograms obtained via high temperature laser-flash heating of a disc-shaped sample in ... En savoir plus

Multiphysical Modeling of Calcium Carbonate Transportation in UV Disinfection in Water Treatment

E. R. Blatchley[1], and B.Z. Sun[1]
[1]Department of Civil Engineering, Purdue University, West Lafayette, IN, USA

Mineral precipitation on to the quartz surface of the lamp jackets in UV disinfection process (fouling) has been recognized as a major problem for UV radiation delivery during disinfection operation. Fouling behavior was observed to be induced thermally and influenced by hydraulic ... En savoir plus

Atmospheric Microwave Plasma

T. S. Marquardt [1], D. F. Shewamene [1], J. J. Swanson [1],
[1] Integrated Engineering, Minnesota State University, Mankato, MN, USA

Plasma gasification of biomass is emerging as an efficient way to reduce the carbon foot print of waste management while generating renewable energy. In general, gasification is a process where electromagnetic wave energy is used to heat biomass sufficiently to convert the bio-mass to ... En savoir plus

Modification of the Ion Angular Distribution in Plasma Sheath: Modeling Approach under COMSOL Multiphysic

J. Brcka
TEL US Holdings, Albany, NY, USA

System for in-situ control of the ion angular distribution function (IADF) in plasma reactor is modeled. Typical IADF depends on the pressure, bias and excitation frequency. It is formed due to a difference in the physical properties of the plasma and sheath domains. The IADF is modified ... En savoir plus

Analysis of Temperature Distribution in a Magnetite Catalyst Bed under Microwave Irradiation using COMSOL Multiphysics®

Dai MOCHIZUKI et al.[1]

Tokyo Institute of Technology, Yokohama, Kanagawa, Japan[1]

Dehydrogenation of ethylbenzene with a magnetite catalyst has been performed with a fixed bed flow type reactor under microwave irradiation. Microwave heating showed a temperature gradient in the catalyst bed. We analyzed an electromagnetic field and heat transfer in the microwave cavity ... En savoir plus

Premier

201–210 of 449

Dernier