Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Support-Q Optimisation of a Trapped Mode Beam Resonator

T. H. Hanley[1], H. T. D. Grigg[1], B. J. Gallacher[1]
[1]Newcastle University, Newcastle-Upon-Tyne, UK

Introducing a disorder into a finite periodic oscillatory system induces the presence of a 'trapped mode': a mode in which the displacement field is localised to the region of the disorder. A main inhibitor to MEMS resonators achieving a high quality (Q) factor is energy radiation ... En savoir plus

Modeling, Simulation, and Control of Dual Electromagnet Active Magnetic Levitation

A.K. Pi?at[1]
[1]AGH University of Science and Technology, Kraków, Poland

Introduction: The dual electromagnet configuration of Active Magnetic Levitation system (AML) where the electromagnets are locate opposite to each other, constitutes and single axis of the Active Magnetic Bearing. The same configuration can be used to test the single electromagnet AML ... En savoir plus

Mathematical Model for Prediction of Transmission Loss for Clay Brick Walls

J. Ratnieks[1], A. Jakovics[1], J. Klavins[1]
[1]Laboratory for Modeling Technological and Environmental Processes, University of Latvia, Riga, Latvia

A 2D numerical model for determination of sound reduction index is set up in this work. Results are in good agreement in middle and high frequency range when using solid structure approximation. Results are compared with experiment. En savoir plus

Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator

B. Li[1], J.H. You[1]
[1]Southern Methodist University, Dallas, TX, USA

An acoustic energy harvesting mechanism at low frequency (~200 Hz) using lead zirconate titanate (PZT) piezoelectric cantilever plates placed inside a quarter-wavelength straight-tube resonator has been studied using COMSOL Multiphysics 4.3 and compared with experimental data. When the ... En savoir plus

Optimization of Device Geometry of a Fully-Implantable Hearing Aid Microphone

A. Dwivedi [1], G. Khanna [1],
[1] National Institute of Technology Hamirpur, Himachal Pradesh, India

The hearing impairment is affecting more than 360 million people all over the world.In India alone, 63 million people suffer from the significant auditory loss. Conventional hearing aids suffer from reliability, practicality and social stigma concerns. The totally implantable devices ... En savoir plus

Impact Simulation of Extreme Wind Generated Missiles on Radioactive Waste Storage Facilities

G. Barbella[1]
[1]Sogin SpA, Roma, Italy

The structural design of temporary storage facilities for radioactive waste generally requires the fulfillment of highly severe performance criteria if compared to conventional buildings. This work focuses on the study of the behavior of a steel door subject to the impact of extreme wind ... En savoir plus

COMSOL® Analysis for Duct Acoustic

M. M. Ghulam [1], E. J. Gutmark [1],
[1] Aerospace Department, University of Cincinnati, Cincinnati, OH, USA

COMSOL analysis of the acoustic modes of two different Combustion Wind Tunnel Facility’s test sections was conducted in this project. The test sections are rectangular ducts, therefore the mathematical expressions to predict the longitudinal and transverse modes inside a tube were used ... En savoir plus

Ferromagnetic Materials for MEMS- and NEMS-Devices

A. Weddemann, J. Jadidian, S. Khushrushahi, Y. Kim, and M. Zahn
Research Laboratory of Electronics
Massachusetts Institute of Technology
Cambridge MA

The modeling of ferromagnetic materials is a challenging task of high industrial and academic impact. Thin film and granular systems form the basis of novel spintronic devices such as modern hard drives with a high data area storage density. In order to push the current limits even ... En savoir plus

3D Acoustic Streaming Field in High-Intensity Discharge Lamps

B. Baumann[1], J. Schwieger[1], M. Wolff[1], F. Manders[2], J. Suijker[2]
[1]Hamburg University of Applied Sciences, Hamburg, Germany
[2]Philips Lighting, Turnhout, Belgium

High-intensity discharge lamps will in the foreseeable future be important light sources despite a growing market share of LEDs. Cost and energy efficient high frequency (300 kHz) operation is hampered by the excitation of acoustic resonances inside the arc tube, which results in low ... En savoir plus

A Study of the Acoustic Response of Carbon Fiber Reinforced Plastic Plates

J. O'Donnell, and G. McRobbie
University of the West of Scotland
Paisly, United Kingdom

This paper gives an introduction to a continuing study detailing the process and development of using both experimental and Finite Element Analysis to characterise the acoustic response of a Carbon Fiber Reinforced Plastic (CFRP) laminate plate provided by a guitar manufacturer. The ... En savoir plus

Premier

231–240 of 363

Dernier