Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Numerical Modeling of Power Reactors' Fuel Bundles

R. Schmidt[1], T. Yousefi[2], B. Farahbaksh[2], M. Z. Saghir[2]
[1]University of Louisiana at Lafayette, Lafayette, LA, USA
[2]Ryerson University, Toronto, ON, Canada

Fuel bundles in the CANDU (CANada Deuterium Uranium) reactor are designed for heating a pressurized coolant (heavy water) to generate electricity. The designs for the fuel bundles differ based on the number of heating elements. The flow of heavy water over the elements and inside the ... En savoir plus

Modeling and Simulation of Hydrogen Storage Device for Fuel Cell Plant Using COMSOL Multiphysics

O. Akanji, and A. Kolesnikov
Department of Chemical & Metallurgical Engineering
Tshwane University of Technolgy
Pretoria, South Africa

In this work, a 2D dynamic simulation for a portion of metal hydride based hydrogen storage tank was performed using computational software COMSOL 4.0a Multiphysics. The software is used to simulate the diffusion and heating of hydrogen in both radial and axial directions. The model ... En savoir plus

Modeling and Optimization of a Mg-Metal Hydride Rectangular Tank in the Hydriding Process

E.I. Gkanas[1], S.S. Makridis[1], A.K. Stubos[2], A. Lopez[3], J. Folch[4], G. Noriega[4]
[1]Materials for Energy Applications Group, Department of Mechanical Engineering, University of Western Macedonia, Greece
[2]Environmental Technology Laboratory, Institute of Nuclear Technology and Radiation Protection, NCSR “Demokritos”, Greece
[3]Universidad Politécnica De Cataluña, Barcelona, Spain
[4]Cidete INGENIEROS, Barcelona, Spain

Hydrogen storage can be considered as a key factor in the development of hydrogen economy. Hydrogen storage in a magnesium hydride MgH2 is a very promising technique for numerous of reasons. Magnesium is abundant, relatively cheap, life – friendly , weight storage capacity of 7.6% ... En savoir plus

Mixing and Residence Time Distribution Studies in Microchannels with Floor Herringbone Structures

A. Cantu-Perez, S. Ping Kee, and A. Gavriilidis
University College London, Department of Chemical Engineering, Torrington Place, London, UK

The mixing characteristics and residence time distributions (RTDs) of a staggered herringbone microchannel have been investigated numerically by COMSOL Multiphysics and by particle tracking algorithms that incorporate diffusion via a random walk. All simulations were validated with ... En savoir plus

Iberian COMSOL Multiphysics Conference

In the conference we bring together a community that is scientifically diverse in an event about the use of COMSOL Multiphysics. Oral and poster presentations highlight achievements in multiphysics modeling and simulations using COMSOL. En savoir plus

Numerical Investigation for the Effect of Guide Panel on Heat Transfer from Steel Containment

Priyanshu Goyal[1], I. Thangamani[1], V. Verma[1], V.M. Shanware[1], R. K. Singh[1]
[1]Bhabha Atomic Research Centre, Mumbai, India

In a nuclear reactor, the containment is the last barrier for the release of radioactivity during severe accident conditions. Containment material can be concrete or steel or steel-lined concrete. Steel containments have a high load bearing capacity and a high degree of leak tightness at ... En savoir plus

Simulating HFIR Core Thermal Hydraulics Using 3D-2D Model Coupling

A. Travis[1], K. Ekici[1], J. Freels[2]
[1]The University of Tennessee, Knoxville, TN, USA
[2]Oak Ridge National Laboratory, Oak Ridge, TN, USA

A model utilizing interdimensional variable coupling is presented for simulating the thermal hydraulic interactions of the High Flux Isotope Reactor (HFIR) core at Oak Ridge National Laboratory (ORNL). The model’s domain consists of a three-dimensional fuel plate and a two-dimensional ... En savoir plus

Magneto-structural Analysis of Fusion grade Superconducting Toroidal Field Coils

A. Amardas [1], and S. Dwivedi[2]
[1] Institute for Plasma Research, Gandhinagar, Gujarat, India
[2] COMSOL Multiphysics Pvt. Ltd, Bangalore, Karnataka , India

In this paper, detail magnetostructural analysis of fusion grade superconducting toroidal field coils that are used in ‘tokamaks’ is presented. The stresses that arise due to Lorentz forces in large size superconducting coils that carry high currents are of catastrophic type in nature. ... En savoir plus

Multi-Scale Modelling of Catalytic Microreactors

B. Hari[1] and C. Theodoropoulos[1]
[1]The University of Manchester, School of Chemical Engineering and Analytical Science, Manchester, UK

Microreactors are important alternative to conventional reactors in chemistry, chemical, pharmaceutical and semiconductor industries due to their operation characteristics such as increased mass and heat transfer, uniform flow, safety, high throughput through array configurations, ... En savoir plus

Thermo-fluid Dynamics Modelling of Hydrogen Absorption and Desorption in a LaNi_4.8Al_0.2 Hydride Bed

D. Baldissin[1] and D. Lombardo[1]
[1]Compumat S.r.l., Torino, Italy

A two-dimensional mathematical model for the absorption and desorption of H2 in LaNi4.8Al0.2 was developed and experimentally validated. The model is composed of an energy balance, a mass balance and a momentum balance. These differential equations are numerically solved by means of the ... En savoir plus

Premier

261–270 of 449

Dernier