Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Modeling the Dynamic Viscous and Thermal Dissipation Mechanisms in a Fibrous Porous Material

B.P. Semeniuk [1], P. Göransson [1],
[1] KTH Royal Institute of Technology, Marcus Wallenberg Laboratory for Sound and Vibration Research, Stockholm, Sweden

The main mechanisms of acoustic attenuation in a bundle of fibres typical of lightweight fibrous porous materials are the dynamic viscous drag forces on the surface of the fibres, and the thermal heat transfer between the solid fibres and the surrounding fluid. Microstructure models ... En savoir plus

Simulation of PCM Melting Process in a Rectangular Enclosure Differentially Heated

G. Petrone[1], G. Cammarata[1]
[1]Department of Industrial Engineering, University of Catania, Catania, Italy

This study deals with a numerical investigation of the melting process of a PCM in a rectangular enclosure differentially heated. COMSOL Multiphysics is used in order to numerically solve Navier-Stokes and energy equations in the considered system. Adopting an enthalpy formulation, one ... En savoir plus

Optimization of the Gas Flow in a GEM Tracker with COMSOL and TENDIGEM Development

F. Noto[1,2], V. Bellini[1,2], E. Cisbani[3,4], V. De Smet[1,5], F. Librizzi[6], F. Mammoliti[1,2], and C. Sutera[6]
[1]Dipart. di Fisica ed Astronomia, Università di Catania, Catania, Italy
[2]INFN – Sezione di Catania, Catania, Italy
[3]IINFN – Sezione di Roma - Sanità Group, Roma, Italy
[4]Italian National Institute of Health, Roma, Italy
[5]Haute Ecole Paul-Henri Spaak, ISIB, Bruxelles, Belgium
[6]NFN - Sezione di Catania, Catania, Italy

The Gas Electron Multiplier (GEM) technology has been proven to tolerate rate larger than 50 MHz/cm2 without noticeable aging and to provide the sub millimeter resolution on working chambers up to 45x45 cm2. A new GEM based tracker is under development for the Hall A upgrade at ... En savoir plus

Thermal Performance of the New Bioclimatic Hall of the Historical Hospital in Florence

C. Balocco, and E. Marmonti
Dipartimento di Energetica “Sergio Stecco”
Università degli Studi di Firenze
Firenze, Italy

The main aim of the present work is the study of the thermal and energy performances of the new hall of the Old St.Maria Nuova Hospital in the center of Florence (Italy). Transient simulations were carried out of the 3D model of the hall to analyse the air flow patterns, distribution and ... En savoir plus

Effects of Flow and Diffusion on Blood Coagulation in Platelet Poor Plasma: a Two-way Coupling Between Hemodynamics and Biochemistry

D. Magnabosco[1,2], H. van Ooijen[2], B. Bakker[2], R. van den Ham[2]
[1]Politecnico di Milano, Milan, Italy
[2]Philips Research, Eindhoven, The Netherlands

Enzyme reactions, blood flow and diffusion in human vasculature play interacting and fundamental roles in blood coagulation. In this complex mechanism, the balance between blood and clot is a delicate equilibrium, whose tight regulation is vital to avoid pathologies such as bleeding and ... En savoir plus

Modelling Flow through Fractures in Porous Media

E. Holzbecher[1], W.L. Wah[1], and M-S. Litz[2]
[1]Georg-August Universität Göttingen, Germany
[2]Freie Universität Berlin, Germany

There are various alternative options concerning modeling fluid flow within fractures in porous media. We give a general overview, with remarks concerning the modeling using COMSOL Multiphysics. Moreover we define and study two test cases for intercomparison. Finally for one of the ... En savoir plus

FEA Simulation of Passive Ferrofluid Cooling Systems

Z. Fang[1,2], R. O'Handley[2], Y. Liu[2], and M. Yang[2,3]
[1]Pennsylvania State University, University Park, PA, USA
[2]Ferro Solutions Inc., Woburn, MA, USA
[3]Massachusetts Institute of Technology, Cambridge, MA, USA

Here we investigate a promising passive cooling method through making advantage of the unique properties of ferrofluid. When a magnetic dipole or a permanent magnet is put at the hot side of a system, it will attract the cold ferrofluid to the hot place and displace the hot ferrofluid ... En savoir plus

Design Improvement Of A Bench-Scale Nanofiltration Device By CFD Study

B. Balannec[1,2], T. Renouard[1,2], and F.Cortès-Juan[3]
[1]Université de Rennes 1-ENSCR-CNRS, France
[2]Université européenne de Bretagne, France
[3]Universidad Politécnica de Valencia, Spain

Feasibility studies in the field of membrane processes are generally first carried out with bench-scale membrane filtration cells. These small laboratory cells also allow evaluating the influence of operational parameters and the membrane performances. Smart design of the cell geometry ... En savoir plus

MHD Electrolyte Flow within an Inter-electrode Gap Driven by a Sinusoidal Electric Field and Constant Magnetic Field

C. Bradley [1], J. Samuel [2],
[1] Benét Laboratories, U.S. Army RDECOM-ARDEC, Watervliet, NY, USA
[2] Department of Mechanical Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute, Troy, NY, USA

PECM is a necessary extension to traditional ECM for some high-performance materials. Electrolyte flow in the inter-electrode gap (IEG) can be assisted using a magnetic field to allow higher currents, but this creates a magnetohydrodynamic flow. This paper presents a study of flow ... En savoir plus

Direct Numerical Simulation of Time Evolution of Vortex Ring

M. Hashiguchi [1],
[1] Keisoku Engineering System Co., Ltd., Chiyoda-ku, Tokyo, Japan

Vortex ring can be useful to generate thrust force for e.g., jellyfish, but its mechanism has not been clarified. In this field, it seems that numerical simulation has an important role of understanding the propulsion mechanism of creature. A vortex ring in a tube, refered to confined ... En savoir plus

Premier

261–270 of 541

Dernier