Articles techniques et présentations

This article describes the design of MEMS based cantilever structure intended for determination of blood group and it is compared with manual method. Cantilever structure design has a sensing layer and when a blood sample comes in contact with this, results in coagulation. The surface ... En savoir plus

Modern wind turbine blades consist of composite airfoil shaped structures that form a hollow acoustic cavity. Because of continually varying aerodynamic forces, gravitational loads, lightning strikes, and weather conditions, all blades will experience leading and trailing edge splits, ... En savoir plus

A good approximation of rough surfaces and their random behaviour is very important in some engineering problems. Fractal modelling provide an alternative to generate rough surfaces based in statistically self-similar non-Euclidean geometries, as seen in [Fig. 1]. Through a frequency ... En savoir plus

Superconducting GHz electronics circuits are frequently used in Radio Astronomy instrumentation. The features of these instrumentations can be significantly improved by using tuneable capacitances, which can be realized by electrically actuated, micromechanical bridges (MEMS) made of ... En savoir plus

Cantilever vibration modes were simulated with COMSOL Multiphysics. In the 1st approach the model consisted of an excitation piezo, a holder plate and a chip where the cantilever was mounted on. A sinusoidal voltage signal was applied to the piezo in the simulation, which resulted in ... En savoir plus

Small nuclear ribonucleoprotein particles (snRNPs) are essential supramolecular complexes involved in pre-mRNA splicing, the process of post-transcriptional RNA modifications. The particles undergo complex assembly steps inside the cell nucleus in a highly dynamic compartment called the ... En savoir plus

An attempt was made, as described in this paper, to assign material properties like shear strength and modulus of elasticity randomly. In this way, the behaviour of a masonry wall with a prefabricated concrete lintel was experimentally tested and simulated using COMSOL. The paper ... En savoir plus

We present studies of the electric field configuration that guides the electrons to the strips through the mesh and its importance to the detector’s optimal operation. Furthermore, analysis of the gas propagation inside the chamber for different gas distribution schemes is discussed. All ... En savoir plus

Cells are complex entities which not only passively sense external stimuli (viz. chemical, optical or mechanical) but also interact with extracellular matrix (ECM) by regulating cellular behavior such as growth, proliferation, migration, etc. Monitoring cell growth and migration of ... En savoir plus

手性等离激元纳米结构被广泛研究并用于生物监测、分析化学和负折射率介质方面。在该结构中直接耦合的机制已经在相关研究中被发现。我们提出由金膜分隔两个金纳米棒(TNMF)的结构(图1)，并发现了间接耦合机制。 在 COMSOL Multiphysics® 中，射频电磁波，频域接口用于求解正弦时变电磁场分布，选此接口计算 TNMF 结构的光学响应。插值函数用来设置金的折射率；设置边界条件模拟周期性结构阵列。结果可通过端口2对端口1的响应获得，并可查看每个数据点的电场、电荷等分布。应用程序库中射频模块的“Plasmonic wire grating ... En savoir plus