- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
CANDU® reactor pressure tubes (PT) contain D2O, which is used as a moderator. Surrounding the PTs are gas-filled Calandria Tubes (CT), which thermally isolate the PTs from the moderator surrounding the fuel channels. If the garter springs move apart, the PT will sag into the CT. Under ... En savoir plus
The sound propagation and absorption properties in porous media under high sound pressure level conditions have been reported elsewhere. Also several analytical and semi-analytical solutions have been developed; however, these solutions are relatively complicated and the provided results ... En savoir plus
The soil ionization is an important phenomenon to be considered in the analysis of grounding electric systems. In this way, this work has proposed a procedure that allows modeling grounding systems with COMSOL Multiphysics and MATLAB® taking into account the soil ionization effects ... En savoir plus
OXIS Energy Ltd is a pioneer in the research and development of Lithium Sulfur batteries. Scaling up from R&D level coin cells to pouch cells for automotive use, engineering design and thermal management start to become critical. In this study, heat flow at various levels of the cell ... En savoir plus
A Proton Exchange Membrane Fuel Cell (PEMFC) comprises a membrane-electrode assembly sandwiched between two conducting ‘monopolar’ plates having engraved gas flow channels, also called the flow field. The purpose of the flow field is to provide sufficient residence time for the gases to ... En savoir plus
In this conference we have brought together a community that is scientifically diverse in an event that allows for inspiring contacts about the use of COMSOL Multiphysics. It is an event to connect with the Spanish and Portuguese COMSOL Multiphysics users and participate in training ... En savoir plus
In this work, we investigate the resonant properties of finite-sized membrane-mass-type elastic metamaterial thin plates. We find that the effective bending stiffness of such metamaterial thin plates can be controlled independently by the out-of-plane rotational resonances, so as to vary ... En savoir plus
In this study, COMSOL Multiphysics® software was used to simulate the surface response to excitation method (SuRE). An aluminum beam with a piezoelectric element bonded is modeled using the COMSOL Acoustics Module. A frequency domain sweep study was performed to simulate the sweep sign ... En savoir plus
Thomas Herrmannsdörfer got his PhD in experimental physics from the University of Bayreuth in 1994. In 1995, he received the Research Award of the Emil-Warburg-Foundation while he worked at the DFG-Graduiertenkolleg Bayreuth. From 1995 – 1998 he worked as a scientist at Hahn-Meitner ... En savoir plus
In this presentation it is shown how an axially symmetric coil can be simulated in a non-symmetric environment. A rotationally symmetric coil can be simulated by using a 2D model. Doing so the serial equivalent resistance of the coil is obtained among other results. The influence of the ... En savoir plus