- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Laser-Heated Pedestal Growth (LHPG) is a crystal growth technique that employs a focused laser beam to melt a source material, creating a molten zone that is precisely controlled to produce high-quality single crystals. This method is particularly advantageous for growing crystals with ... En savoir plus
Laser powder bed fusion (LPBF) is one of the most beneficial manufacturing methods for its precision and ability to create parts with complex geometry, although high thermal gradient due to the considerable temperature difference between ambient and peak temperature appeared during laser ... En savoir plus
Laser drilling of titanium and its alloys is widely used in aerospace industry, as it offers selective removal of material at high accuracy and speed. However, laser drilling often inherits defects such as large heat affected zone, micro cracks and recast layer. These defects depend upon ... En savoir plus
Thermocouples are widely used in industry for process temperature measurement. Calibration drift is a well-known problem which adversely affects process control, particularly in harsh environments (e.g. high temperature). To overcome this, a mechanism for self-calibration of ... En savoir plus
Electron beam has a wide range of applications in the material processing and joining techniques. Apart from that, it has also been utilized to simulate steady as well as transient fusion reactor relevant heat loads. Transient heat load events spontaneously occur in the fusion reactor. ... En savoir plus
Laser percussion drilling is widely used in the aerospace industry to produce cooling holes in jet engine components. This process is a thermal, contact-free process which involves firing a sequence of focused optical pulses onto a target material [1-4]. During each optical pulse, the ... En savoir plus
A solidification process of casting explosives in shell is studied in this paper. An enthalpy method approach is used to model the solidification process. Both the thermal and mechanical effects are taken into account. An ALE (Arbitrary Lagrangian-Eulerian) method is used to represent ... En savoir plus
The current and energy transfer to cathodes of vacuum arcs usually occurs in bright, narrow regions, known as cathode spots. Owing to extreme conditions in these spots, the cathode surface is eroded: electrode material is vaporized, and craters and molten metal jets are formed. The study ... En savoir plus
In this paper, we present a study of the simulation of Directed Energy Deposition (DED) Additive Manufacturing (AM) using a multiphysics approach. We use a combination of Heat Transfer in Fluids, Solid Mechanics and Laminar Flow physics to accurately simulate the DED process. The ... En savoir plus
Calibration drift of temperature sensors is a well-known problem which adversely affects process control, particularly at high temperatures. Some new approaches are being developed [1,2], but degradation of resistive sensor elements is hard to prevent. To overcome this, graphene, which ... En savoir plus
