- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
The detection, characterization, and classification of underground environmental hazardous objects [mines, IEDs, and other unexploded military hardware] is a worldwide problem that needs urgent attention and solution. While electromagnetic sensor technologies have been applied to ... En savoir plus
This paper describes the modeling of an electrochemical biosensor embedded in a microfluidic channel to determine the concentration of a target biomolecule. The total amount of analyte in the sample can be calculated by integrating the analyte concentration over the duration of the peak ... En savoir plus
COMSOL Multiphysics® is used to simulate a thermal transport based flow sensor, which will be embedded in a micro-channel of a Poly-methyl methacrylate (PMMA) based microfluidic device. The channel height is 100μm and for simulation purposes the lengths has been set to 1.2mm. The heater ... En savoir plus
SAFARI is a far-infrared imaging spectrometer for the Japanese satellite observatory SPICA. SAFARI covers the wavelength range 34—210 μm (1.4—8.8 THz) using Transition-Edge-Sensor (TES) bolometers. We have built a test facility to qualify and characterize the SAFARI focal plane units ... En savoir plus
Gas shales are one of the potential sinks considered for carbon dioxide sequestration. Therefore further research on the importance of sorption on the carbon dioxide sequestration potential is highly topical. Experimentally measured maximum sorption capacity of carbon dioxide was about ... En savoir plus
The effect of plasmon-wavelength scaled gratings on the surface plasmon resonance is studied experimentally and theoretically. The model samples are multi-layers containing laser fabricated gratings at bimetal-polymer interfaces. Dual-angle dependent surface plasmon resonance ... En savoir plus
In electric distribution network, current and voltage measurement for metering, monitoring, and protection & control applications is done via instrument transformers (current and voltage transformers). These measurement devices are deployed during the construction phase of the ... En savoir plus
Pyrometallurgical furnaces are used to produce metals such as copper, nickel and platinum by the smelting process. During smelting, the undesired material components are separated from the desired metal resulting in the formation of a slag and matte/metal phase. The slag phase ... En savoir plus
In “Micro-Electro-Mechanical-Systems” shortly known as MEMS, one of the most important and effective principle of creating transduction of electrical power to displacement force is thermal expansion. A slim beam of MEMS material, typically Silicon, is heated by the application of ... En savoir plus
Cholesterol is an essential lipid for human body. The desired total plasma cholesterol for an individual is less than 5.2 mM (200 mg/dL) and it poses a potential health threat when the level is greater than 6.2 mM (240 mg/dL) [1]. Excessive plasma cholesterol causes poor cardiovascular ... En savoir plus

 
                                 
                                 
                                 
                                 
                                 
                                 
                                 
                                 
                                