Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Terme recherché:

"building"

Nanoscale Heat Transfer using Phonon Boltzmann Transport Equation

S. Sihn[1,2], and A.K. Roy[2]

[1]Air Force Research Laboratory, Wright-Patterson Air Force Base, Dayton, Ohio, USA
[2]University of Dayton Research Institute, Dayton, Ohio, USA

COMSOL Multiphysics was used to solve a phonon Boltzmann transport equation (BTE) for nanoscale heat transport problems. One dimensional steady-state and transient BTE problems were successfully solved based on finite element and discrete ordinate methods for spatial and angular ... En savoir plus

Modeling Implementation of Smart Materials such as Shape Memory Alloys and Electro-Active Metamaterials

Manuel Collet
PhD
Femto-STInstitute UMR CNRS 6174 Dept Applied Mechanics,
Besancon, France

Manuel Collet is a member of the Department of Applied Mechanics of the FEMTO-ST Institute. He graduated with a degree in Mechanical Engineering from Ecole Centrale de Lyon in 1992 and obtained his PhD in 1996 about Active control of vibrating structures by mean of semi distributed ... En savoir plus

A Finite Element Analysis on the Modeling of Heat Release Rate, as Assessed by a Cone Calorimeter, of Char Forming Polycarbonate

D. Statler[1], and R. Gupta[2]
[1]Mid-Atlantic Technology, Research and Innovation Center, South Charleston, WV, USA
[2]Department of Chemical Engineering, West Virginia University, Morgantown, WV, USA

During the pyrolysis and combustion of polymers, heat is released and is typically measured with a cone calorimeter to better assess the polymer’s flammability. Modeling heat release rate, as assessed by cone calorimetry, has not been extensively studied for char-forming polymers, such ... En savoir plus

Thermal Performance of the New Bioclimatic Hall of the Historical Hospital in Florence

C. Balocco, and E. Marmonti
Dipartimento di Energetica “Sergio Stecco”
Università degli Studi di Firenze
Firenze, Italy

The main aim of the present work is the study of the thermal and energy performances of the new hall of the Old St.Maria Nuova Hospital in the center of Florence (Italy). Transient simulations were carried out of the 3D model of the hall to analyse the air flow patterns, distribution and ... En savoir plus

Simulation and Verification of Coupled Heat and Moisture Modelling

N. Williams Portal[1], M. van Aarle[2], and J. van Schijndel[2]
[1]Department of Civil and Environmental Engineering, Chalmers University of Technology, SE-412 96 Göteborg, Sweden
[2]Department of Architecture, Building and Planning, Technical University of Eindhoven, Eindhoven, The Netherlands

This paper includes the implementation and comparison of two types of moisture potentials for the combined transport: the natural logarithmic of the suction pressure (LPc) and the relative humidity (RH). The finite element method has been utilized to evaluate coupled 1D thermal and ... En savoir plus

Modeling PIN Photodiodes

R.W. Pryor
Pryor Knowledge Systems Inc., Bloomfield Hills, MI, USA

This paper presents one approach to the modeling of an abrupt junction PIN photodiode light sensor using COMSOL Multiphysics software and the incorporated SPICE® capability. The current model is built using the capabilities of SPICE in COMSOL Multiphysics 4.0. This model demonstrates the ... En savoir plus

Downscale Finite Element Modeling of Aortic Valve Leaflets for In-Situ Estimation of Cell Level Mechanics

R. Buchanan[1], M. Sacks[1]
[1]Institute for Computational Engineering and Sciences, Department of Biomedical Engineering, University of Texas, Austin, TX, USA

As in all tissues, mechanical forces in the aortic valve (AV) modulate the constituent cell population’s physiology and biosynthetic activity. While advances have been made toward the understanding of this complex multi-scale relationship, the specific role that and extracellular matrix ... En savoir plus

Study of Electromagnetic Shielding, a Comparison between Experiment and FEM Simulation

G. Sun [1], C. De Blasiis [1], O. Sekula [1], P. Corsaro [1],
[1] Brugg Kabel AG, Brugg, Switzerland

The loaded underground high voltage cable generates magnetic field with industrial frequency. Depending on the current rating and cable allocation, the magnetic exposure to public area may exceed the requested limit from customer. Extra shielding should then be applied. A primary FEM ... En savoir plus

The Role of COMSOL Toward a Low-Enriched Uranium Fuel Design for the High Flux Isotope Reactor

J.D. Freels[1]
[1]Oak Ridge National Laboratory, Oak Ridge, Tennessee, USA

Design and safety analyses are underway to convert the High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) from a high-enriched uranium (HEU) fuel to a low-enriched uranium (LEU) fuel. The primary constraint for the project is that the overall fuel plate ... En savoir plus

Modelling Coating Lifetime: First Practical Application for Coating Design

T. Machado Amorim [1], C. Allély[1], J. Caire[2]
[1]Arcelor Mittal Research, Maizieres-les-Metz, France
[2]ENSEEG, Grenoble, France

The corrosion at cut-made edges is significant due to the anode to cathode surface ratio in this region. The major problems are the risks of red rust appearance at the exposed steel surface, and the risks of paint delamination in case of insufficient corrosion protection. The work ... En savoir plus

Premier

301–310 of 626

Dernier