Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Finite Element Analysis into Eigenfrequencies of a Total Hip Stem with Different Levels of Loosening

T. Bender [1], M. Sass [1], W. Mittelmeier [1], R. Bader [1], D. Kluess [1]
[1] Department of Orthopaedics Research Laboratory for Biomechanics & Implant Technology, University Medicine Rostock, Rostock, Germany

A finite element model of a total hip replacement (THR) has been developed from the approach of modal analysis. The model is capable of determining the first 15 Eigenmodes of a THR with an artificial bone model. The model was equipped with several different defects to simulate a ... En savoir plus

3D Simulation of an Acceleration Sensor with Self-sufficient Energy Supply

L. Weber [1], L. Fromme [1], D. Zielke [2],
[1] University of Applied Sciences Bielefeld, Department of Engineering Sciences and Mathematics, Bielefeld, Germany
[2] University of Applied Sciences Bielefeld, Institute BIFAM, Bielefeld, Germany

Piezo buzzers, made of piezoelectric material glued on a brass plate, are usually used as signaler, but the buzzer can also be used to convert mechanical into electrical energy. If acceleration influences the buzzer, the structure is bent by its mass and a voltage can be measured between ... En savoir plus

Finite Element Modeling of Pulsed Eddy Current Applied to Ferrous and Titanium Fasteners in F/A-18 Airplane Wing Structure

V. K. Babbar[1], P. R. Underhill[1], T. W. Krause[1]
[1]Department of Physics, Royal Military College of Canada, Kingston, ON, Canada

Pulsed eddy current (PEC) is being developed to detect stress corrosion cracks between fasteners on the inner wing spars of the F/A-18 Hornet aircraft. The spars are located below a thick carbon/epoxy wing skin, and so cannot be detected by conventional eddy current techniques without ... En savoir plus

Model of an Interdigitated Electrodes System for Cell Counting Based on Impedance Spectroscopy

E. Bianchi[1][2], F. Bellati[1], E. Rollo[2], G. Dubini[1], C. Guiducci[2]
[1]Politecnico di Milano, LaBS, Laboratory of Biological Structure Mechanics, Milano, Italy
[2]Swiss Federal Institute of Technology (EPFL), Laboratory of Life Sciences Electronics - Swiss Up Chair, Lausanne, Switzerland

A model of a cell counter sensor based on Impedance Spectroscopy (IS) has been implemented in COMSOL Multiphysics. The cell counter is a silicon-based microdevice consisting in 3D electrodes placed in a wide microchannel: cells flow in the microchannel through the electrodes to be ... En savoir plus

Modelling Thermal Time-of-Flight Sensor for Flow Velocity Measurement

O. Ecin[1], E. Engelien[2], M. Malek[2], R. Viga[2], B. Hosticka[1], and A. Grabmaier[2]

[1]Institut of Mikroelektronische Systeme, University Duisburg-Essen, Duisburg, Germany
[2]Institut of Elektronische Bauelemente und Schaltungen, University Duisburg-Essen, Duisburg, Germany

This communication reports on a numeric fluid dynamics simulation on a pipe flow model. The basic background is to determine the velocity of a flowing fluid in a pipe by using the Thermal Time-Of-Flight (TTOF) method on water. The visualization of the temperature and velocity ... En savoir plus

Design and Simulation of MEMS Micro Heater for DNA Amplification

D. Sharma [1], A. Siddiqua [1],
[1] Nitte Meenakshi Institute of Technology, Bengaluru, Karnataka, India

PCR (Polymerase Chain Reaction) is a recent well researched technique which can be employed to obtain an amplified DNA (Deoxyribonucleic Acid). A continuous flow polymerase chain reaction with integrated MEMS based design micro heater for DNA amplification is implemented. Temperature ... En savoir plus

Simulation of an ECT Sensor to Inspect the Reinforcement of Concrete Structures

N. P. de Alcantara Jr. [1], L. Gonçalves Jr. [1],
[1] São Paulo State University - Unesp, Bauru, SP, Brazil

The paper describes the use of COMSOL Multiphysics to simulate an ECT (Eddy Current Testing) sensor, designed to inspect the elements of the reinforcement of concrete structures. The paper describes the steps for the COMSOL simulation, and analyze the results for three configurations ... En savoir plus

Nondestructive Testing of Composites Using Model Based Design

E. Nesvijski[1]
[1]ACOUSTICS@MBD CONSULTANTS, LLC, Westborough, MA, USA

There is a practical interest among composite materials manufacturers to high-speed accurate non-destructive evaluation (NDE) technology for voids inspection when these voids are natural components of such complex structures like resin insulated layer of double-sided copper-clad ... En savoir plus

Modelization of Photoacoustic Trace Gases Sensors

B. Parvitte[1], C. Risser[1], R. Vallon[1], V. Zéninari[1]
[1]GSMA - Université de Reims, Reims, France

This paper aims to demonstrate the simulation of photoacoustic signals using FEM software. The Acoustics Module of the software COMSOL Multiphysics is used to calculate the response of a differential Helmholtz resonator cell. In a second part a preliminary result obtained with the ... En savoir plus

Simulation of Sample Inhomogeneity in Microwave Impedance Microscopy

T. S. Jones [1], C. R. Pérez [1], J. J. Santiago-Avilés [1],
[1] University of Pennsylvania, Philadelphia, PA, USA

Microwave impedance microscopy (MIM) is a novel mode of atomic force microscopy that can measure topography and local electrical impedance simultaneously and with nanometer spatial resolution [1]. This technique is typically used qualitatively, identifying defects in nanodevices or ... En savoir plus

Premier

301–310 of 515

Dernier