- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Electric construction components exposed to alternating high voltage have to withstand a significant amount of thermal loads and, resulting from the changes in Temperature , structural stresses. In order to achieve minimization of these loads, optimizing the geometry can be a helpful ... En savoir plus
The recently discovered Pockels effect in strained silicon has made silicon a promising candidate material for optical modulators and switches. In this work, we propose a model that links the electro-optic effect to the applied strain (in fact to the strain gradient). This model may be ... En savoir plus
Project X is a proposed proton accelerator complex at Fermilab. The CW LINAC is based on five types of resonators operating at three frequencies: half-wave, spoke, and elliptical. The low beam current for the CW operation of Project X requires cavities to operate at a high loaded Q and, ... En savoir plus
The flow field of a coaxial jet with the internal (primary) flow being subsonic and the external (secondary) flow being supersonic has been investigated with COMSOL Multiphysics® software. We used the results to correct defects in the nozzle geometry and we evaluated the effect of heat ... En savoir plus
This paper presents the design and simulation of a thermal sensor using COMSOL Multiphysics® software for the detection of low body temperature syndrome which can allow the early detection of cancer. This sensor is made of an alloy consisting of two materials with different coefficients ... En savoir plus
Access to electricity has become a major problem. In the process of solving this problem we should consider even a small source of electricity. Piezotyres are made to produce electricity from vehicle tyres. For this we have used a piezoelectric property, one of the natural wonder. COMSOL ... En savoir plus
The elbow joint in dogs constitutes a complex interaction of three bones, the humerus, radius and ulna. Medial coronoid disease (MCD) is a common cause of lameness in dogs, i.e. fracturing of the most prominent portion of the ulnar joint surface driven in flexion and in pivot against ... En savoir plus
A research team at FSU CAPS is developing a novel fast disconnect switch based on a piezoelectric actuator for use in next-gen electric power distribution systems. COMSOL Multiphysics® software was used to optimize geometry and material selection of the disconnect switch. Current ... En savoir plus
The safety of large civil structures is often evaluated by means of numerical models based on the Finite Element Method. In this frame, the choice of a constitutive law able to represent the complex mechanical behaviour of concrete is a key point. This paper deals with a detail ... En savoir plus
The paper presents the application of COMSOL Multiphysics® software to the modelling of superconducting accelerator magnets. A 2D magneto-thermal model is developed, using an equivalent magnetization formulation to take into account the eddy-currents’ effects. Due to the model ... En savoir plus