Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Design and Simulation of 3D ZnO Nanowire Based Gas Sensors for Conductivity Studies

N. Gouthami, D. Parthiban, M. Alagappan, and G. Anju
PSG College of Technology
Coimbatore
Tamil Nadu, India

The objective of this paper is to design a 3D Gas Sensor for sensing Hydrogen gas and to increase the conductivity at nano level. In this novel design, nanorods act as the sensing layer. The sensitivity towards gas adsorption is found to be increased due to its high surface to volume ... En savoir plus

High Curvature Bending of Ultra-Thin Chips and Chip-on-Foil Assemblies

D. van den Ende[1]
[1]Holst Centre / TNO, Eindhoven, The Netherlands

Ultra-thin chips of less than 20µm become flexible, allowing integration of silicon IC technology with highly flexible electronics. This combination allows for highly intelligent products of unprecedented thinness, flexibility and cost. Examples include sensor systems integrated into ... En savoir plus

Non-Isothermal Kinetics of Water Adsorption in Compact Adsorbent Layers on a Metal Support

G. Füldner, and L. Schnabel
Fraunhofer Institute of Solar Energy Systems, Freiburg, Germany

Water adsorption in highly porous materials can be used in heat transformation processes for the efficient use of energy in heat and cold production. One technology for such a thermal heat transformation is the use of water adsorption in highly porous adsorbents like zeolite. To ... En savoir plus

Remote Sensing of Electromagnetically Penetrable Objects: Landmine and IED Detection

R. Eze [1], G. Sivulka [2], ,
[1] City University of New York - LaGuardia Community College, Long Island City, NY, USA
[2] Regis High School, New York, NY, USA

The detection, characterization, and classification of underground environmental hazardous objects [mines, IEDs, and other unexploded military hardware] is a worldwide problem that needs urgent attention and solution. While electromagnetic sensor technologies have been applied to ... En savoir plus

Air Damping Simulation of MEMS Torsional Paddle

N. Mahmoodi[1], C. J. Anthony[1]
[1]University of Birmingham, Birmingham, UK

Viscous damping has a significant effect on dynamic performance of the resonators operating within fluid. This work is aimed to find the viscous damping for MEMS torsional paddle operating in air. Interaction of moving structure with the fluid requires a complicated and challenging ... En savoir plus

Modeling the Process of Drying Stationary Objects inside a Tumble Dryer Using COMSOL Multiphysics

T. Zeineldin
Department of Automatic Control and Mechatronics, University of Paderborn, Paderborn, Germany

Temperature and residual moisture content of a stationary Textile in a home tumble dryer are simulated in a 2D model with COMSOL Multiphysics. Moisture migration to the textile surface is modeled in the form of capillary flow and vapor diffusion along with heat transfer in the form of ... En savoir plus

FEM Study on Contactless Excitation of Acoustic Waves in SAWDevices

A. K. Namdeo[1], N. Ramakrishna[2], H. B. Nemade[1,2], and R. P. Palathinkal[1]

[1] Department of Electronics and Communication Engineering, Indian Institute of Technology Guwahati, Assam, India
[2] Centre for Nanotechnology. Indian Institute of Technology Guwahati, Assam, India

In this paper a finite element method(FEM) study of a surface acoustic wave (SAW)device excited by electrostatic coupling method is performed by using COMSOL Multiphysics. We have modeled a Rayleigh wave type SAW device by choosing YZ Lithium niobate as the substrate. The effect of ... En savoir plus

Rapid Prototyping of Biosensing Surface Plasmon Resonance Devices using COMSOL & Matlab software

J.J. Dubowski[1], and D.Carrier[1]
[1]Department of Electrical and Computer Engineering, Université de Sherbrooke, Quebec, Canada

We present a Finite Element Method simulation procedure that allows rapid development of prototype devices comprising novel self-referenced interference SPR (surface plasmon resonance) biosensing microstructures. The procedure takes advantage of COMSOL Multiphysics and MATLAB software ... En savoir plus

Simulation of Thermal Transport Based Flow Meter for Microfluidics Applications

E. Byas[1], A. Arevalo[1], I.G. Foulds[1]
[1]King Abdullah University of Science and Technology, Thuwal, Saudi Arabia

COMSOL Multiphysics® is used to simulate a thermal transport based flow sensor, which will be embedded in a micro-channel of a Poly-methyl methacrylate (PMMA) based microfluidic device. The channel height is 100μm and for simulation purposes the lengths has been set to 1.2mm. The heater ... En savoir plus

Detector and Calibration-source Models for the SAFARI Detector Test Facility

M. Audley[1], G. de Lange[1], C. Bracken[2]
[1]SRON Netherlands Institute for Space Research, Groningen, The Netherlands
[2]National University of Ireland, Maynooth, Ireland

SAFARI is a far-infrared imaging spectrometer for the Japanese satellite observatory SPICA. SAFARI covers the wavelength range 34—210 μm (1.4—8.8 THz) using Transition-Edge-Sensor (TES) bolometers. We have built a test facility to qualify and characterize the SAFARI focal plane units ... En savoir plus

Premier

301–310 of 694

Dernier