Articles techniques et présentations

The radio-frequency(RF) plasma sources have shown great potential in various industrial applications such as thin coatings deposition and polymers modification[1,2]. Physics of low pressure RF plasmas has been investigated significantly[3]; however, this kind of plasma source is rarely ... En savoir plus

The tunable capacitor (variable capacitor) is one of the most important and components in filters, Phase shifters, VCO etc. A tunable capacitor can also be built using electro – thermal actuating mechanism. Compared to electro static, tunable capacitors actuated by thermal actuators ... En savoir plus

We studied the optical phonon excitations (LO) of ordered arrays of dot/ rod core-shell CdSe/ CdS nanorods by Raman spectroscopy. Upon deposition on planar substrates the nanorods formed super-lattice structures via side-by side assembly into tracks over some microns of length. COMSOL ... En savoir plus

In this paper, design and analysis of a novel MEMS capacitive microphone which uses corrugations and perforations in diaphragm is presented. The corrugation and perforation in diaphragm reduces the residual stress and increases the mechanical sensitivity of diaphragm. Instead of the ... En savoir plus

Since the advent of Terhertz(THz) technology, improving the THz emission power has been one of the major research goal. One of the methods to increase the THz emission power is to increase the coupling of excitation laser light to the dielectric substrate.The field of nano-plasmonics ... En savoir plus

INTRODUCTION: Many electrical insulation systems use a combination of gas and solid media. Typical examples considered here include the combination of solid epoxy insulation and SF6 in a gas insulated subsystem (GIS). To understand how such a system performs under DC voltages, accurate ... En savoir plus

Anchor loss causes a reduction in the quality factor of high frequency micromechanical resonators. This study illustrates the importance of anchor design in mitigating anchor loss in high frequency resonators. The performances of two different anchor configurations for a silicon nitride ... En savoir plus

This paper discusses the simulation studies on a vibration based energy harvesting system to convert the undesirable mechanical vibration to useful green power. The design consists of a resonating proof mass and a spring system enclosed in housing and fixed on the source of vibration. A ... En savoir plus

This paper projects a novel 3D capacitive accelerometer design to identify a severe accident and initiate airbag deployment systems. It will detect the rapid negative acceleration of the vehicle to avoid the severity of the collision. Such a device demands excellent performance in terms ... En savoir plus

A MEMS based Knudsen’s pressure gauge working in the range of 1e-5 mbar to 10 mbar is designed and simulated in COMSOL. The working principle is based on Knudsen’s forces that arise when two plates are held at different temperatures and their separation is comparable to the mean free ... En savoir plus