- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
The world’s landfills are beginning to fill up due to the growing human population. Landfills require land and there will come a time when there will be no land to be used for landfills. A solution that is gaining attraction is the conversion of traditional “dry-tomb” landfills (used for ... En savoir plus
Dr. Yosuke Mizuyama is a Lead Engineer at Panasonic Boston Laboratory. He has been working on various electronics for Panasonic Corporation in Japan for many years. His research includes incandescent/fluorescent lamp, electrostatic/pzt inkjet, MEMS and BD/DVD/CD optical drive. His ... En savoir plus
A novel numerical method characterizing groundwater flow in unconfined aquifer is demonstrated. In contrast to the conventional method (Dupuit approach considering horizontal flow only), hydraulic head is simulated in horizontal and vertical directions. The new approach is introduced via ... En savoir plus
A recurring problem, in heat assisted magnetic recording is the build-up of thermal energy in the near-field transducer leading to NFT deformation and the cessation of operation. A mechanism to dissipate this excess heat in the NFT without greatly effecting its’ plasmonic response is ... En savoir plus
The current work is dedicated to develop a FEM model for compressors using moving mesh. An analytical model is already developed for a classic compressor based on mass and energy balance and is extended to a finned piston compressor. COMSOL Multiphysics® is employed to verify the ... En savoir plus
Hydrophobic meshes are a new, promising technique for the recovery of spilled oil in the ocean. They allow to recover and store oil, while filtering it from the surrounding water. They are clean, efficient and can be used in continuously. These meshes have one drawback, however: if they ... En savoir plus
In clean coal technologies, improving energy conversion efficiency is one of the most important directions. Compared to traditional subcritical power plants, pressure-increased supercritical power plants improve the plant energy efficiency from 35% up to 45%. This work presents a study ... En savoir plus
This paper highlights the use of the COMSOL Multiphysics® software during the design process of a thermal cycling system for regulated PCM phase transitioning. The primary purpose of the simulations was to predict the system behavior in response to an ON/OFF temperature control system ... En savoir plus
In general battery cells are charged/discharged using constant current or constant power expressed as C-Rates and P-Rates respectively. We are developing a single cell-level Li-Ion battery model in order to simulate the performance and the physicochemical phenomena under power ... En savoir plus
Energy piles, i.e. heat exchangers located within the foundation piles of buildings, are used for heating of cooling purposes. Although the absolute values of deformations and temperature gradients are low or moderate, the entire setting can be influenced by thermo-hydro-mechanical ... En savoir plus