Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

CFD Analysis of a Printed Circuit Heat Exchanger

K. Wegman [1], X. Sun [1],
[1] Department of Mechanical and Aerospace Engineering, Ohio State University, Columbus, OH, USA

In this experiment, the performance of a Printed Circuit Heat Exchanger (PCHE) was studied using COMSOL Multiphysics® software. PCHEs are diffusion bonded heat exchangers containing semicircular, chemically etched flow paths. Helium was used as the working fluid on both the hot and cold ... En savoir plus

Urban Air Purification Using Semi-Active Photocatalysis

M. Boumahdi [1], J. Roegiers [2] , C. El Amrani [1] , S. Denys [2]
[1]Department of Computer Engineering, Abdelmalek Essaadi University, Tangier, Morocco
[2]Sustainable Energy, Air & Water Technology, Department of Bioscience Engineering, University of Antwerp, Antwerp, Belgium

Photocatalysis has received considerable attention in recent years with a huge potential in air purification applications. This work focusses on the semi-passive use of photocatalytic surfaces in streets as an innovative method for removing anthropogenic pollutants (especially volatile ... En savoir plus

Transient Model of a Fluorine Electrolysis Cell

J. Vukasin [1], I. Crassous [1], B. Morel [1], J. Sanchez-Marcano [2], P. Namy [3]
[1] HRP, AREVA NC, France
[2] Institut Européen des Membranes - CNRS, France
[3] Simtec, France

In the nuclear fuel cycle, fluorine is produced by the electrolysis of the molten salt KF-2HF. It is a complex process to study since hydrofluoric acid and fluorine are hazardous and highly corrosive. A 3D-model of a lab-scale fluorine electrolysis cell has been developed to increase ... En savoir plus

Ultrasound-assisted Microfluidic Devices: Insights and Optimization of Sono-microreactors

F. J. Navarro-Brull [1], P. Poveda [2], J. Ramis [2], R. Gómez [1],
[1] Departament de Química Física, Universidad de Alicante, Alicante, Spain
[2] Departament de Física, Enginyeria de Sistemes i Teoria del Senyal, Universidad de Alicante, Alicante, Spain

Possible drawbacks of microreactors are inefficient reactant mixing due to the predominance of laminar flow and clogging (when solid-forming reactions are performed or solid catalyst suspensions are used). Ultrasound has been successfully implemented not only to prevent these problems ... En savoir plus

Magneto-hydrodynamic Flow in Electrolyte Solutions

M. Qin[1], and H. Bau[1]
[1]Department of Mechanical Engineering and Applied Mechanics, University of Pennsylvania, Pennsylvania, USA

The paper presents and compares two models for simulating magneto-hydrodynamic flow of RedOx electrolyte in a conduit patterned with circular pillars. The first model solves the coupled Nernst-Planck and Navier-Stokes equations subjected to Butler-Volmer electrode kinetics and provides ... En savoir plus

Finite Element Evaluation of J-integral in 3D for Nuclear Grade Graphite using COMSOL Multiphysics®

A. Bhushan [1], S. K. Panda [1], D. Khan [1]
[1] Indian Institute of Technology (BHU), Varanasi, India

Evaluation of J-integral in three dimensional bimodular stress field has been carried out for a cracked three point bend specimen having properties of nuclear grade graphite (2020). The additional area integral has an important role in J-integral. The stress dependent elasticity ... En savoir plus

Hydrothemal Carbonization: A Renewable Alternative to Fossil Fuels and Respective Evaluation

P. Kladisios [1], A. Stegou [1], Z. Sagia [1],
[1] National Technical University of Athens, Athens, Greece.

Humanity is faced with an imminent energy crisis. The exponential growth of the human population and the consequential increase of the required energy on a global scale, the dramatic climate change and the exhaustibility of natural resources combined, force us to strive towards a ... En savoir plus

Diffusion and Reaction in Fe-Based Catalyst for Fischer-Tropsch Synthesis Using Micro Kinetic Rate Expressions

A. Nanduri[1], P. L. Mills[1]
[1]Department of Chemical & Natural Gas Engineering, Texas A&M University, Kingsville, TX, USA

Fischer-Tropsch synthesis (FTS) is a highly exothermic polymerization reaction of syngas (CO+H2) in the presence of Fe/Co/Ru-based catalysts to produce a wide range of paraffins, olefins and oxygenates, often known as syncrude. Multi-Tubular Fixed Bed Reactors (MTFBR) and Slurry Bubble ... En savoir plus

变孔隙率热化学储能过程数值模拟

郭昊 [1], 恽迪 [1],
[1] 西安交通大学

能量存储技术是减少能量浪费和节约能源的最为有效的手段之一。热化学储能技术具备高功率、大容量和低损耗的特点，在实际应用中可近乎无损耗地进行跨季节性利用，上述优点使得热化学储能近年来吸引了国内外学者的广泛关注。热化学能存储过程涉及流动、传热、传质、反应多个物理过程，为了完成实验室级测试到工业级应用的推广，储能设备的仿真模拟是必不可少的一环。为了简化计算，目前几乎所有的数值研究都假设储能材料的孔隙率为均匀且定常的；但在实际的物理过程中，孔隙率与反应程度紧密相关并随时间和空间变化。本文通过推导建立孔隙率变化的热化学储能模型 ... En savoir plus

Coupled Numerical Modeling and Thermodynamic Approach for SiC Growth Process

J. M. Dedulle [1], K. Ariyawong [1], D. Chaussende [2]
[1] Univ. Grenoble Alpes, Grenoble, France
[2] CNRS, Grenoble, France

Silicon carbide (SiC) single crystals are industrially produced by the physical vapor transport technique. Apart from the geometry of the growth setup, there are two main process parameters that can be controlled: temperature and pressure. To support the development of the process, ... En savoir plus

Premier

321–330 of 449

Dernier