Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Investigations on Hydrodynamic in Stirred Vessels for Educational Purposes

A. Egedy, T. Varga, and T. Chován
University of Pannonia
Department of Process Engineering
Veszprém, Hungary

With detailed hydrodynamic modelling of a system the critical parameters and operation limits can be determined. In the field of fluid dynamic and reactor engineering one of the most important aspects is the practical knowledge of future engineers and technicians. In our research ... En savoir plus

The Soil as Bioreactor: Reaction-diffusion Processes and Biofilms

M. Richter[1], S. Moenickes[2], O. Richter[2], T. Schröder[1]
[1]BASF SE, Agricultural Center, Limburgerhof, Germany
[2]Institute of Geoecology, TU Braunschweig, Braunschweig, Germany

In a soil pore, water flows through the biofilm, where the density of the latter was assumed to represent a flow resistance. This mechanism was implemented as a local change of fluid viscosity proportional to local biofilm density. It was assumed that diffusive substrate transport is ... En savoir plus

COMSOL Multiphysics-Based Exploratory Insulin Secretion Model for Isolated Pancreatic Islets

P. Buchwald
University of Miami, Miami, FL, USA

Insulin released by the beta-cells of pancreatic islets is the main regulator of glucose homeostasis, hence, insulin secretion models are of considerable interest for many possible applications. Building on our previous oxygen consumption and cell viability model for avascular islets of ... En savoir plus

2D Axial-Symmetric Model For Fluid Flow And Heat Transfer In The Melting And Resolidification Of A Vertical Cylinder

S. Morville[1], M. Carin[1], M. Muller[2], M. Gharbi[2], P. Peyre[2], D. Carron[1], P. Le Masson[1], and R. Fabro[2]
[1]Laboratoire LIMATB, Université de Bretagne Sud, Lorient , France
[2]Laboratoire PIMM, Arts et Métiers ParisTech, Paris, France

Laser direct deposition is a process, different from molding or machining, which allows the producing of fully densified and operational components. This technique involves injecting metal powder through a coaxial nozzle into a melt pool obtained by a moving laser beam. The final object ... En savoir plus

Keyhole Formation During Spot Laser Welding: Heat and Fluid Flow Modeling in a 2D Axisymmetric Configuration

M. Courtois[1], M. Carin[2], P. LeMasson[2], S. Gaied [1]
[1]ArcelorMittal, Global R&D, Montataire, France
[2]LIMATB Laboratory, Université de Bretagne Sud, Lorient, France

For a better understanding of phenomena associated to the appearance of defects in laser welding, a heat and fluid flow model is developed. This study is focused on the modeling of a static laser shot on a sample of steel. This 2D axialsymmetric configuration is used to study phenomena ... En savoir plus

Finite Element Approach for Optimizing the Cooling of the Metallic Bipolar plates for Fuel Cell Applications

E. Firat[1,2], C. Siegel[1,2], L. Kühnemann[1,2], P. Beckhaus[1], and A. Heinzel[1,2]
[1]Zentrum für Brennstoffzellentechnik (ZBT) GmbH, Duisburg, Germany
[2]University of Duisburg Essen, Duisburg, Germany

Metallic bipolar plates promise several advantages for fuel cell applications. On the other hand, cooling of these plates is a critical task regarding design optimization. The high thermal conductivity of the material and the complex geometry of these plates affect directly the cooling ... En savoir plus

Optimization of Jet Mixer Geometry and Mixing Studies

A. Egedy[1], B. Molnar[1], T. Varga[1], T. Chován[1]
[1]Department of Process Engineering, University of Pannonia, Veszprém, Hungary

The primary aim of using jet as mixer, like in case of other mixing devices, is to increase the heat and mass transfer between the phases. Beside the injection position the geometry of the jet mixer and the injection nozzle has a major effect on the injection. In our study COMSOL ... En savoir plus

Simulation of Droplet Impingement on a Solid Surface by the Level Set Method

J. Hu[1], R. Jia[1], K. Wan[2], X. Xiong[3]
[1]Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
[2]Mechanical and Industrial Engineering, Northeastern University, Boston, MA, USA
[3]Department of Electrical Engineering, University of Bridgeport, Bridgeport, CT, USA

The dynamic behavior of droplet impingement on a solid surface is important to many engineering applications. This paper studied the dynamic behavior of a droplet impinging onto solid dry surfaces with different surface wettability using the COMSOL Multiphysics® software. The simulation ... En savoir plus

Embedded Microfluidic/Thermoelectric Generation System for Self-Cooling of Electronic Devices

R. Kiflemariam[1], H. Fekramandi[1], C. Lin[1]
[1]Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA

A 3D electro-conjugate heat transfer model was made to study an embedded microfluidic/TEG system (μF/TEG) system. An innovative embedded microfluidic/TEG system (μF/TEG) system is proposed which enables a device to be able to provide power to its cooling system eliminating external power ... En savoir plus

Catalytic Pellet Based Heterocatalytic Reactor Bed Models Development

G. Rádi, T. Varga, and T. Chován
University of Pannonia, Veszprem, Hungary

Nowadays mathematical models are applied in almost every field of our life to predict how real systems behave. Computational Fluid Dynamics (CFD) has become a standard tool for analyzing various situations where fluid flow has a significant effect on the studied processes. Complex models ... En savoir plus

Premier

321–330 of 541

Dernier