Articles techniques et présentations

The variability of the design parameters caused by material properties like thermal conductivity is the major challenge in Micro Electromechanical System (MEMS). In resonator design the basic problem is that the frequency changes with temperature variation and quantitative explanation ... En savoir plus

During last twenty years capacitive micromachined ultrasonic transducers (CMUT) have been developed extremely fast [1-2]. CMUT is an attractive alternative to traditional piezoelectric transducer, which converts electrical signal to mechanical vibration and vice versa. The main ... En savoir plus

In this paper, the effects of roughness in the surfaces of the plates caused due to nonuniform etching during their release and/or due to defects in the original wafer on the capacitance in RF-MEMS parallel plate varactors are analyzed. Capacitance extraction due to surface roughness has ... En savoir plus

This paper describes the design and characterization of an 8 slots resonant cavity Magnetron, which undergoes thermal-structural effects due to cathode heating. The proposed study involves Thermal Stress, Eigen-frequency and Particle Tracing analysis based on COMSOL Multiphysics®. ... En savoir plus

For PE insulated cables both the temperature difference ?T and the electric field coefficient ? have a significant influence on the electric field distribution because PE has a nonlinear electric conductivity which is approximately a function of the temperature and the electric field ... En savoir plus

We consider a 3D boundary value problem arising in electrostatics. The potential is stimulated by current sources placed on a cross-section S of the domain. In many applications it is sufficient to know the potential in S. So, one is interested in an appropriate 2D model taking into ... En savoir plus

Numerical simulation can be advantageously employed to predict the main cell features (e.g., the reaction rate distribution on the electrodes, the cell voltage, or the electrolyte temperature) in order to optimize the design and operational conditions of the process. In this poster, we ... En savoir plus

Recently, electrokinetic flows have raised the interest of the scientific community. Driving flow with an electric field leads to promising applications for mixing, concentration, pumping application in lab on chips. However, current models are still inaccurate and don\'t fit the ... En savoir plus

Introduction The electrical properties of materials are important in many different applications. In microelectronics for example, films must perform as insulators, semiconductor or as conducting layers. In recent years, scanning probe methods are being extended to the nanometre scale ... En savoir plus

A mathematical model for the simulation of contaminant such as heavy metals removal from soils by electric fields was performed in a 2-D geometry using COMSOL Multiphysics. Electrokinetic phenomena is the result of the coupling between hydraulic and electrical potential gradients in ... En savoir plus