- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Classical hydraulic dampers are flexible devices that are used to attach a component to a mounting base. Vibration amplitude reduction can be achieved by improving the old technique of suspension by bringing in application of Magnetorheological or Electrorheological fluid in it. Due to ... En savoir plus
Surface Acoustic Waves (SAW) is the acoustic wave that propagates along the surface of the substrate with amplitude decaying exponentially away from the surface. A basic SAW device consists of two IDT’s on a piezoelectric substrate such as quartz. Surface Acoustic Wave can be ... En savoir plus
In a modern IC design, the capability of predicting the temperature profile is critically important as well as cooling and related thermal problems are the principal challenges. To address these challenges, thermal analysis must be embedded within IC synthesis. This paper presents ... En savoir plus
The current therapies available to treat cancer patients are surgical operation and chemo therapy. The drawbacks are the side effects caused by these therapies. Hyperthermia is a treatment technique based on deactivation of cancer cells by raising the temperature in the range of 43 ºC ... En savoir plus
In this work, a piezoelectric tactile sensor will be designed and simulated using COMSOL Multiphysics®. The sensor is designed in order to assess the pressure exerted on the human body while the robotic surgery is performed. The sensor consists of a rigid and compliant cylindrical ... En savoir plus
This paper presents the design and simulation of a thermal sensor using COMSOL Multiphysics® software for the detection of low body temperature syndrome which can allow the early detection of cancer. This sensor is made of an alloy consisting of two materials with different coefficients ... En savoir plus
Wind turbines are the conventional type of energy source. The main focus of this work is the analysis and fabrication of cost effective VAWT. Cost of the turbine is reduced by low cost material and minimizing its total weight. There are two main types of the wind turbines i.e. Horizontal ... En savoir plus
The greatest challenge being faced for realization of Micro-Electro Mechanical System (MEMS) technology is the lack of a simple, quick and reliable method for the fabrication of 3-D microchannel in the range of micrometers. A novel fabrication technique which opens possibilities for the ... En savoir plus
