- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
A 2D axisymmetric model was considered in order to evaluate the propagation paths of the ultrasonic waves generated inside an aluminum plate sample due to a rapid thermal expansion produced by laser pulse. Laser Doppler Vibrometer is used to experimentally validate the numerical results ... En savoir plus
Arrays of vertical pillars, Micro Purification Chips, have been widely used for analyte capture from liquid samples [Henderson et. al, 2006], [Toner et. al, 2007], [Stern et. al, 2010]. However exact understanding of the capture efficiency mechanisms has not been previously explained. ... En savoir plus
Intracerebral hemorrhage is a condition where a blood vessel in the brain ruptures and causes internal bleeding leading to hemorrhagic stroke. 800 in every 100,000 people suffer from stroke each year and it's one of the major causes of mortality worldwide. Diagnosis involves Neurological ... En savoir plus
We designed AlGaAs all-dielectric nanoantennas with magnetic dipole resonance at near-infrared wavelengths. These devices are shaped as cylinders of 400nm height and radii varying from 175 nm up to 230 nm. We analyzed volume χ(2) nonlinear effects associated to a magnetic dipole ... En savoir plus
This paper projects a novel 3D capacitive accelerometer design to identify a severe accident and initiate airbag deployment systems. It will detect the rapid negative acceleration of the vehicle to avoid the severity of the collision. Such a device demands excellent performance in terms ... En savoir plus
Introduction: This work presents the design of a novel flow cell based miniaturized electrochemical respirometer to monitor organic content in water samples semi-continuously, in contrast to current Biochemical Oxygen Demand, BOD, methods. Simulation techniques has been used to ... En savoir plus
Laser anemometers based on application of Doppler Effect have been developed and are used in-flight, on aircrafts for measurement of air flow parameters, mainly its speed versus the airplane. The air speed measurements are vital for safe flights. The main basic idea of Doppler techniques ... En savoir plus
In this paper the propagation of a plane wave in a large lossy medium is presented. The investigated geometry consists in a wedgeshaped lossy dielectric embedded in a lossy material with different electromagnetic properties. The aim of the study is to determine the feasibility of a radar ... En savoir plus
Vacuum window is required in the millimeter wave transmission line in ITER*. It is to be designed to minimize the microwave reflection while keeping a robust and safe approach to meet the requirements. We have studied transmission characteristics of various dielectric materials over D ... En savoir plus
The finite-element method (FEM) (COMSOL RF Module) has been employed for modal analyses of porous silicon (PSi) waveguides composed of a guiding layer of low porosity (high refractive index) on a cladding layer with higher porosity (lower refractive index). These can be made by switching ... En savoir plus
