Articles techniques et présentations

In electrochemical machining process, it is very important to control electrolyte flow field to remove contamination such as slug, or gas to be generated by the machining process as well as heat control for electrolyte, machining tool and work piece. To reduce the overcut of workpiece, ... En savoir plus

This talk is for intermediate-level users of COMSOL who, like the present author, are relative newcomers to numerical simulation but have a strong grounding in Hydrodynamics or related areas of Mathematical Physics. Most turn-key Computational Fluid Dynamics packages, including COMSOL ... En savoir plus

Small-scale plasma jets in atmospheric air can produce regions of highly reactive chemistry coincident with temperatures approaching room temperature allowing his type of cold plasma jet to be used for decontamination of surfaces and sterilization of living tissue. In the device under ... En savoir plus

This research deals with the design of suitable microreactors for the catalytic oxidation of volatile organic compound (VOCs), using propane as a model molecule. The microreactor considered consists of eleven parallel channels, in which an Au/Cr/γ-Al2O3-catalyzed combustion reaction ... En savoir plus

A very simplified system for high voltage test is studied, considering reason for voltage holding failures which are not covered by conventional and local design criteria. A first understanding of the problem is obtained by solving the electrostatic potential in a 2D axis symmetric ... En savoir plus

Chemical engineering students and practitioners need an understanding of fluid flow and heat transfer inside heat exchangers. Because the flow within plate heat exchangers is difficult to visualize, we developed COMSOL Multiphysics® simulations of plate heat exchangers for students to ... En savoir plus

The U.S. Army Engineer Research and Development Center (ERDC) is currently exploring the use of infrasound sensors to monitor the health of structures of interest. Infrasound is acoustic energy below 20 Hz and is capable of propagating many kilometers from the source with little ... En savoir plus

Plasma torches are used in processing of materials as well as in the energy industry for producing plasma. In a non-transferred arc plasma torch, an electric arc can be initiated by applying a direct current (DC) between the cathode and anode, both placed inside the torch. Then, the ... En savoir plus

Elastocaloric heating/cooling takes advantage of the structural changes in shape memory alloys (SMAs) that release and absorb heat when a strain is applied over a transition temperature. Heating/cooling cycles that use SMAs offer a potential solution to issues associated with the use of ... En savoir plus

Thermal ablation driven by an acoustic heat source has tremendous potential for the treatment of diseased tissue. In many applications, such as treating tumors in the liver, bulk removal of tissue is required, and thermal ablation can reliably cause necrosis for a relatively large tissue ... En savoir plus