Consultez les proceedings de la Conference COMSOL 2020
Effective Thermal Conductivity of Composite: Numerical and Experimental Study
In this paper, thermal properties of composites are investigated numerically and experimentally. In the numerical study, finite-elements method in COMSOL is used to modelize heat transfer and to calculate the Effective Thermal Conductivity (ETC) of the composite for three elementary ... En savoir plus
Dynamic Model for Catenary Mooring: Experimental Validation of the Wave Induced Load
This paper will present a numerical model based on COMSOL Multiphysics suited to simulate the dynamic response of a catenary mooring (or a submarine cable). In general, mooring lines are subject to a direct wave load (e.g. drag, inertia) in addition to the movement of the vessel to ... En savoir plus
Windows HPC Server 2008 R2 Goals and Overview
A Mechanical Engineer from Madras University and an MBA from Symbiois Pune, Vinoo has been working in the Indian Enterprise and Technical Computing space for more than 10 years. He has been consulting customers for their Technical and High Performance Computing needs for the past 5 ... En savoir plus
Modelling and Analysis of Acoustic Emissions and Structural Vibration in a Wind Turbine
The onshore wind turbine industry must overcome many technical, commercial, and environmental difficulties. A significant element for planning consent is operational noise. Acoustic limits are strictly enforced and can lead to near-neighbour complaints as well as contractual disputes. ... En savoir plus
Rheological Behaviour of Biphasic Material
The rheological behaviour of a biphasic material is quite difficult to model because of the difficulties to represent the evolution of the space position of each solid particle in the solid matrix. The first part of this study consider an equivalent material by homogeneisation method. ... En savoir plus
Heat and Mass Transfer in Partially Frozen Food Material
The freezing curve of the food material was extracted from Differential Scanning Calorimetry experiments. A heat conductive model was generated in COMSOL, including the thermo-physical characteristics and the phase transition behavior. The resulting temperature-time evolutions at ... En savoir plus
Equation-Based Modeling: The Structural Contact Problem Solved by The Velocity Approach
The contact between infinitely rigid body and deformable part is studied using the velocity as a dependent variable. A simple forging case is evaluated. The velocity approach is realized by means of using COMSOL with the Equation-Based Modeling. The contact model evaluated in this work ... En savoir plus
Simulation of Interaction of Low-Temperature Plasma with Immersed Solids
The computer simulation with COMSOL Multiphysics has become a widely used technique for the study of various problems in the field of plasma physics. Despite the increasing performance of computers, fully three-dimensional particle simulations still have got extremely high demands on ... En savoir plus
Material Flow around a Bobbin Tool for Friction Stir Welding
This study presents an approach to model the material flow around a bobbin tool for Friction Stir Welding (FSW). In this CFD model the aluminum is treated as a highly viscous non Newtonian shear thinning liquid. The model is formulated in a 3D Eulerian frame. The temperature field and ... En savoir plus
Deformation Behavior Of A Liquid Droplet Impacting A Solid Surface
The quality of coatings obtained by means of thermal spraying depends strongly on the mechanism of the interaction between the molten droplets and the surface to be covered. The aim of the present study is to simulate the impact of a droplet onto a substrate, in order to have a good ... En savoir plus