Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Electrical Conductivity Modeling and Validation in Unidirectional Carbon Fiber Reinforced Polymer Composites

P. Banerjee[1], J. L. Schmidt[1]
[1]Department of Mechanical Engineering and Materials Science, Washington University in St. Louis, St. Louis, MO, USA

Carbon fiber (CF) reinforced polymer composites (CFRP) have begun to replace Al-Zn-Mg alloys in applications which require high strength-to-weight ratios. The anisotropy of CFRP composites is a result of melt crystallized extrusion techniques that impart an inherent directionality to the ... En savoir plus

Topology Optimization of Thermoviscous Acoustics in Tubes and Slits with Hearing Aid Applications

R. Christensen [1],
[1] GN ReSound A/S, Ballerup, Copenhagen, Denmark

When acoustic applications include small geometries, i.e. mm/submillimeter range, so-called thermoviscous effects can greatly affect the pressure response. This paper deals with acoustic topology optimization of such miniature structures with thermoviscous effects taken into account. ... En savoir plus

Design Of Magnetoplasmonic Resonant Nanoantennas For Biosensing Applications

M.E. Mezeme, and C. Brosseau
Université Européenne de Bretagne–Université de Bretagne Occidentale, Brest, France

The study of plasmonic structures continues to be at the forefront of research in nanotechnology and condensed matter physics. Here, we present a numerical model we have created and verified to characterize the frequency dependence of the effective magnetic permeability and permittivity ... En savoir plus

Fluid Flow and Current Density Distribution in Large-area HT PEMFCs

G. C. Bandlamudi[1,2], C. Siegel[2], C. Heßke[1], and A. Heinzel[1,2]
[1]ZBT Duisburg, Duisburg, Germany
[2]University of Duisburg-Essen, Duisburg, Germany

High temperature polymer electrolyte membrane fuel cells (HT PEMFCs) are very promising technologies when used in combined cooling and heating power (CCHP) systems. They are operated at 160°C, offering the possibility of high tolerance to fuel impurities and a possibility to use the heat ... En savoir plus

Inductive Conductivity Measurement of Seawater

R. W. Pryor[1]
[1]Pryor Knowledge Systems, Inc., Bloomfield Hills, MI, USA

The conductivity of seawater directly correlates with the concentration of dissolved salts. This model demonstrates a new approach to the methodology of inductive conductivity measurement of seawater and other liquids. COMSOL Multiphysics® was used to build a parametrically swept model ... En savoir plus

Modeling Bioelectrochemical Systems for Waste Water Treatment and Bioenergy Recovery with COMSOL Multiphysics®

T. Oyetunde[1], D. Ofiteru[1], J. Rodriguez[1]
[1]Masdar Institute of Science and Technology, Abu Dhabi, United Arab Emirates

Most conventional wastewater treatment processes are quite energy-intensive. Global wastewater production is increasing due to growth in population, industrialization, and urbanization, creating an urgent need for energy-efficient wastewater treatment technologies. Moreover, waste ... En savoir plus

COMSOL® Analysis for Duct Acoustic

M. M. Ghulam [1], E. J. Gutmark [1],
[1] Aerospace Department, University of Cincinnati, Cincinnati, OH, USA

COMSOL analysis of the acoustic modes of two different Combustion Wind Tunnel Facility’s test sections was conducted in this project. The test sections are rectangular ducts, therefore the mathematical expressions to predict the longitudinal and transverse modes inside a tube were used ... En savoir plus

Acoustic and Flow Analysis to Reduce Boiler Hum

Th. B. J. Campmans[1],
[1]LBPSIGHT, Nieuwegein, The Netherlands

A installation caused severe hum, with 30 Hz as dominant frequency, causing serious annoyance. The acoustic study showed resonances around 30 Hz. Poor flow conditions existed at the inlet and outlet of the forced draft fan. Flow patterns were studied using CFD. Both the inlet and ... En savoir plus

A Methodology For The Simulation Of MEMS Spiral Inductances Used As Magnetic Sensors

S. Druart, D. Flandre, and L.A. Francis
Université catholique de Louvain - ICTEAM, Louvain-la-Neuve, Belgium

In this paper, a methodology to simulate the electric behavior of spiral inductances is presented and discussed. All the methodology is built with the COMSOL software used with the Matlab scripting interface and then allows performing fully parameterized simulations. The program ... En savoir plus

Vibration and Acoustic Analysis of a Trussed Railroad Bridge under Moving Loads

R. Costley[1], H. Diaz-Alvarez[1], M. McKenna[1], A. Miller[1]
[1]U.S. Army Engineer Research and Development Center, Vicksburg, MS, USA

Two finite element models have been developed to investigate the acoustic radiation from a Pratt truss train bridge. The first model was a time dependent structural model that determined the vibration response of the structure due to two wheels, representing a single axle, moving across ... En savoir plus

Premier

401–410 of 551

Dernier