Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Modeling Ferrofluid Flow in an Annular Gap Moving with Reciprocating Shaft

Y. He[1], R. Nilssen[1]
[1]Department of Electric Power Engineering, Norwegian University of Science and Technology, Trondheim, Norway

Ferrofluids have been successfully used in the seals for rotary shafts, but few studies focus on the reciprocating motion seals. Since the completely different operational regimes, previous experiences on the rotary motions could not be directly applied on the cases for reciprocating ... En savoir plus

Numerical Prediction of Particle Dynamics Within a Cytometer. Application to Counting and Sizing by Impendance Measurement

D. Isèbe[1]
[1]HORIBA Medical, Montpellier, France

This paper describes how to numerically tackle the problem of counting and sizing particles by impedance measurement in an orifice–electrode system. The model simulate the particle dynamics submitted to strong hydrodynamic stresses through a microorifice and compute the voltage pulses ... En savoir plus

Flow Focusing Droplet Generation Using Linear Vibration

A. Salari[1], C. Dalton[1]
[1]Department of Electrical & Computer Engineering, University of Calgary, Calgary, AB, Canada

Flow focusing microchannels are widely used in droplet generation mechanisms. In this paper, the effect of linear vibration on the flow pattern in a flow focusing structure and the corresponding formed droplets were numerically investigated using COMSOL Multiphysics® software. The ... En savoir plus

Multiscale Modeling of Polymer Crystallization

R. Spina[1], M. Spekowius[2], C. Hopmann[2]
[1]Dept. of Mechanics, Mathematics and Management (DMMM), Politecnico di Bari, Bari, Italy.
[2]Institute of Plastics Processing (IKV), RWTH Aachen, Aachen, Germany.

The manufacturing of high quality injection molded parts requires a deep understanding of material properties, process parameters and product design. The behavior of a polymer during the injection molding process and the performance of the final part are strongly determined by the ... En savoir plus

Numerical Study of Droplet Formation inside a Microfluidic Flow-Focusing Device

Y. Li[1], M. Jain[1], K. Nandakumar[1]
[1]Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA

The micro-nanometer sized droplets have tremendous applications in bio-diagnostics, polymerization processes etc. In this work, we numerically investigate the droplet formation process of silicone oil in aqueous solution in a MFF device. A conservative level-set method is adopted to ... En savoir plus

Determination and Verification of the Forchheimer Coefficients for Ceramic Foam Filters using COMSOL CFD Modeling

M.W. Kennedy[1], K. Zhang[1], J.A. Bakken[1], R.E. Aune[1]
[1]Norwegian University of Science and Technology, Trondheim, Norway

Experiments have been conducted with water at velocities from ~0.015-0.77 m/s to determine the permeability of 50 mm thick commercially available 30, 40, 50 and 80 Pores Per Inch (PPI) Ceramic Foam Filters (CFF) used for liquid metal filtration. Measurements were made using two different ... En savoir plus

Modeling of Expanding Metal Foams

B. Chinè[1,2], M. Monno[3]
[1]Laboratorio MUSP, Macchine Utensili e Sistemi di Produzione, Piacenza, Italy
[2]School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
[3]Politecnico di Milano, Dipartimento di Meccanica, Milano, Italy

Metal foams are interesting materials with many potential applications. They are characterized by a cellular structure represented by a metal or metal alloy and gas voids inside (Fig.1). A common metallic cellular material is aluminum foam which can be produced metallurgically by heating ... En savoir plus

Baffle Design: Tube-in-Shell Electrical Gas Heaters

K. Lund[1], S. Lord[2]
[1]Kurt Lund Consulting, San Diego, CA, USA
[2]SML Associates, Encinitas, CA, USA

It is frequently necessary to electrically heat gases; a convenient geometry is the familiar tube-in-shell heat exchanger, where the tube side is modified for electrical heater-rods, and the baffled shell side contains the flowing gas, as indicated in Fig. 1. However, this modification ... En savoir plus

Full Coupling of Flow, Thermal and Mechanical Effects in COMSOL Multiphysics® for Simulation of Enhanced Geothermal Reservoirs

D. Sijacic[1], P. Fokker[1]
[1]TNO, Utrecht, The Netherlands

The effective modeling of enhanced geothermal systems (EGS) requires the coupling of geomechanics, fluid flow and thermal processes. An understanding of the complete system with these coupled processes is vital, not just for reservoir stimulation targeted at enhancing reservoir ... En savoir plus

Fluid Motion Between Rotating Concentric Cylinders Using COMSOL Multiphysics® Software

P. L. Mills [1], K. Barman [1], S. Mothupally [1], A. Sonejee [1],
[1] Texas A&M University - Kingsville, Kingsville, TX, USA

Introduction Fluid flow patterns in research or process-scale equipment where a fluid is contained between concentric rotating cylinders in the absence of bulk axial flow has received notable attention in the field of fluid mechanics. Annular flows occur in many practical applications, ... En savoir plus

Premier

411–420 of 541

Dernier