Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Toutes

Boston 2025

Terme recherché:

velocity field

Drag Fluctuations of a Fully Deployed Flow Actuator Embedded Inside Turbulent Boundary Layer Flow

Dr. A. Elzawawy[1]
[1]Engineering & Technology Department, Vaughn College of Aeronautics & Technology, Flushing, NY, USA

Introduction: In this work, a CFD model of 2D flow around a fully deployed flow actuator was developed using COMSOL Multiphysics® software and the CFD Module. The results of COMSOL modeling is also compared with the experimental data of the same dimensions actuator. The 100mmX2mm ... En savoir plus

Fluid Dynamics Analysis of Gas Stream in a Plasma Torch Reactor

C. Soares[1], N. Padoin[1], F. A. Cassini[1], M. Sanchez[2]
[1]Federal University of Santa Catarina, Florianópolis, SC, Brazil
[2]University of Oklahoma, Norman, OK, USA

Plasma technology has potential applications in a wide range of areas, such as microwave reflectors/absorbers, material processing, sterilization and chemical neutralization. The knowledge about the fluid behavior in such systems has a central role, since the stability of the flow in the ... En savoir plus

Computational Modelling of Fluid Dynamics in Electropolishing of Radiofrequency Accelerating Cavities

H. Rana[1], L. Ferreira[2]
[1]Loughborough University, Leicestershire, UK
[2]European Organisation for Nuclear Research (CERN), Genéve, Switzerland

Electropolishing is an electrochemical process that radiofrequency accelerating cavities undergo in order to improve their inner metal surface finishing. This is performed prior to their installation into particle accelerators, in order to enhance their accelerating properties. Using ... En savoir plus

Theoretical Study of Phase and Amplitude Characteristics of Microwave Coplanar Delay Line Containing Thin Ferroelectric Layer

V. Nikolaevtsev[1], S. Yankin[2], S. Suchkov[1], D. Suchkov[1], A. Litvinenko[1]
[1]Saratov State University, Saratov, Russian Federation
[2]Joint International Laboratory LICS/LEMAC, IEMN UMR CNRS 8520, EC Lille, France

We theoretically studied the microwave coplanar line of different geometry based on MgO substrate with a thin (30 nm) ferroelectric layer under the external electric field using the environment of 3D modeling in COMSOL Multiphysics®, RF Module, Frequency Domain. Frequency dependence of ... En savoir plus

Analysis Of Particle Trajectories For Magnetic Drug Targeting

A. Heidsieck, and B. Gleich
Zentralinstitut für Medizintechnik, TU München, München, Germany

The technique of magnetic drug targeting binds genetic material or drugs to superparamagnetic nanoparticles and accumulates them via an external magnetic field in a target region. However, it is still a challenge for this approach to succeed in areas with high flow rates, like the aorta ... En savoir plus

Investigation on Sensor Fault Effects of Piezoelectric Transducers on Wave Propagation and Impedance Measurements

I. Buethe[1], C.-P. Fritzen[1]
[1]University of Siegen, Institute of Mechanics and Control Engineering-Mechatronics, Siegen, Germany

For active Structural Health Monitoring (SHM), one popular sensor type is the piezoelectric wafer active sensor (PWAS) due to its multi-purpose application as actuator and sensor and its low cost. It is used to generate a wave field, which interacts with the structure and is recorded by ... En savoir plus

Simulation of Piezoelectrically Actuated Drug Delivery Device for Biomedical Application

J. Dsa[1], Manisha[1], M. Goswami [1], B.R Singh [1],
[1] Indian Institute of information technology Allahabad, Allahabad, Uttar Pradesh, India

We have developed a piezoelectrically controlled MEMS drug delivery device for on-demand release of defined quantities of drug. A drug-loaded micro reservoir (∅6mm×550µm) is sealed by A membrane placed over the drug reservoir on which the piezoelectric material is deposited. On ... En savoir plus

Air Damping Simulation of MEMS Torsional Paddle

N. Mahmoodi[1], C. J. Anthony[1]
[1]University of Birmingham, Birmingham, UK

Viscous damping has a significant effect on dynamic performance of the resonators operating within fluid. This work is aimed to find the viscous damping for MEMS torsional paddle operating in air. Interaction of moving structure with the fluid requires a complicated and challenging ... En savoir plus

Modeling of a Counter Flow Plate Fin Heat Exchanger

R. Jia[1], J. Hu[1], X. Xiong[2]
[1]Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA
[2]Department of Electrical and Computer Engineering, University of Bridgeport, Bridgeport, CT, USA

Plate fin heat exchangers are widely used for heat recovery or cooling purposes in many industries, such as cryogenics, aerospace and automobile industries. This paper developed a numerical model to simulate the heat transfer and fluid flow in a counter flow plate fin heat exchanger and ... En savoir plus

Multiphysics Analysis of Electromagnetic Flow Valve

J. S. Crompton [1], K. Koppenhoefer [1], S. Yushanov [1],
[1] AltaSim Technologies, Columbus, OH, USA

Solenoid valves control fluid flow by using the passage of an electric current to produce a magnetic field that controls the displacement of a pre-tensioned plunger. As the electric current increases, the induced force causes the plunger to move upward against the force exerted by a ... En savoir plus

Premier

421–430 of 1352

Dernier