Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Finite Element Analysis into Eigenfrequencies of a Total Hip Stem with Different Levels of Loosening

T. Bender [1], M. Sass [1], W. Mittelmeier [1], R. Bader [1], D. Kluess [1]
[1] Department of Orthopaedics Research Laboratory for Biomechanics & Implant Technology, University Medicine Rostock, Rostock, Germany

A finite element model of a total hip replacement (THR) has been developed from the approach of modal analysis. The model is capable of determining the first 15 Eigenmodes of a THR with an artificial bone model. The model was equipped with several different defects to simulate a ... En savoir plus

Tilted Micro Air Jet for Flow Control

J. Malapert[1], R. Yahiaoui[1], R. Zeggari[1], and J-F. Manceau[1]
[1]Institut Femto-St, Université de Franche-Comté Besançon, France

In this paper, we present an interesting method to microfabricate a tilted micro air jet generator. We used the well-know Deep Reactive Ion Etching (DRIE) technique in order to realize in a silicon substrate a double side etching. For aircraft and cars, micro air jets will take an ... En savoir plus

Electrical Simulation and Current Spreading Analysis in the GaN-based Light-Emitting Diode Devices

J. Chen
Mechanical Engineering
National Central University
Taiwan

Numerical simulations can well predict the electric current and temperature distribution in GaN-based LED chips. It can be used to improve the device design and optimization of the LED devices. Future work will include the optical modeling to analyze the optical properties of the LED ... En savoir plus

PA Loudspeaker System Design Using Multiphysics Simulation

R. Balistreri [1],
[1] QSC Audio Products, LLC., Costa Mesa, CA, USA

This paper utilizes lumped circuits equivalent and pressure acoustics to simulate the behavior of a PA loudspeaker in order to improve its design. En savoir plus

Simulations of nanophotonic waveguides and devices using COMSOL Multiphysics

Z. Zheng
School of Electronic and Information Engineering, Beihang University, Beijing, China

Design and optimization of the nanophotonic devices are critical in realizing advanced photonic integrations in the future. COMSOL can be used for simulating various types of nanophotonic devices involving different materials and dimensions. This report talks about some recent work of ... En savoir plus

COMSOL Multiphysics® Software as a Metasurfaces Design Tool for Plasmonic-Based Flat Lenses

B. Adomanis [1], D. B. Burckel [2], M. Marciniak [1],
[1] Air Force Institute of Technology, Wright-Patterson AFB, OH, USA
[2] Sandia National Laboratories, Albuquerque, NM, USA

Introduction: Flat lenses require precise control of a phase gradient across an interface, which is enabled through the application of engineered surfaces, such as Metasurfaces [1]. Periodic arrays of plasmonic antennas have been utilized to generate this desired phase gradient, which ... En savoir plus

Interaction between Light Wave and Asymmetric Metal/Insulator/Metal (MM) Structure Coupled with Subwavelength Holes at Optical Fiber Apex

Yasushi OSHIKANE[1]

[1]Osaka University, Suita, Osaka, Japan

Electromagnetic simulation of light wave interaction at around a tip of single mode optical fiber, which is formed of circular truncated cone shape, has been studied numerically by COMSOL Multiphysics and the RF Module (and Wave Optics Module). The fiber tip has specific nanostructure of ... En savoir plus

Investigation on Sensor Fault Effects of Piezoelectric Transducers on Wave Propagation and Impedance Measurements

I. Buethe[1], C.-P. Fritzen[1]
[1]University of Siegen, Institute of Mechanics and Control Engineering-Mechatronics, Siegen, Germany

For active Structural Health Monitoring (SHM), one popular sensor type is the piezoelectric wafer active sensor (PWAS) due to its multi-purpose application as actuator and sensor and its low cost. It is used to generate a wave field, which interacts with the structure and is recorded by ... En savoir plus

The Acoustoelastic Effect: EMAT Excitation and Reception of Lamb Waves in Pre-Stressed Metal Sheets

R.M.G. Ferrari[1]
[1]Danieli Automation S.p.A., Buttrio, UD, Italy

The acoustoelastic effect relates the change in the speed of an acoustic wave travelling in a solid, to the pre-stress of the propagation medium. In this work the possibility of assessing nondestructively the stress status in metal sheets, by using the acoustoelastic effect, is ... En savoir plus

A Study of Optical Sensor Based on Fiber Bragg Grating Using COMSOL Multiphysics^®

C. Gavrila[1] and I. Lancranjan[2]

[1]Technical University of Civil Engineering Bucharest, Bucharest, Romania
[2]Advanced Study Centre, National Institute for Aerospace Research “Elie Carafoli”, Bucharest, Romania

Fiber optic sensors can measure a large range of physical, chemical and environmental variables such as temperature, pressure, shape, position, chemical concentration, moisture, etc. Fiber optic sensors provide measurements in applications where the conventional electrical based sensors ... En savoir plus

Premier

431–440 of 507

Dernier