- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Power grid voltages and currents may be distorted due to presence of harmonics. Measurements of such voltage with harmonics may be performed using newly developed instrument with a small air-core transformer based probe as the input unit. The probe must be shielded against unknown ... En savoir plus
Domestic microwave ovens are notorious for their uneven heating of food materials. This is caused by a varying electromagnetic field whose variation is caused by a number of factors dependent on the oven and the food parameters. Experimental validation of heating would therefore give ... En savoir plus
Interaction between the probe and a defect in eddy current non-destructive evaluation is studied. Evaluation of sensor signal response is the basis for the calculation. In this work a differential sensor is considered and the problem regarded here is problem 8 from the testing of ... En savoir plus
ICP reactors are usually meter sized and driven at RF frequencies, for example at 13.56 MHz. We developed a miniature resonator allowing an inductive type of coupling of microwaves at 2.45 GHz to a plasma jet, flowing in ceramic tubes. Previous experiments and simulations show an ... En savoir plus
Coil antenna is the simplest form in well-logging tools for resistivity measurement of the formation. This paper introduces how to accurately compute the impedance of the coil with very thin wires at high frequency, and with the complex borehole structure, e.g., metal housing and ... En savoir plus
A common clinical treatment is the application of alternating electromagnetic fields using a screw implant to the weak bone tissue within the femoral head, which speed up the bone regeneration in case of avascular necrosis of the femoral head . In our present work the bipolar induction ... En savoir plus
Glass containing nanoparticles is a promising material for various photonic applications due to the unique optical properties mainly resulting from the strong surface plasmon resonance (SPR) of the silver nanoparticles. The characteristics of the resonance can be modified by varying ... En savoir plus
The performance of simplified cylindrical cloaks with various material parameters was investigated. The performance metric was the overall scattering width of the cloak with various objects in the hidden region. COMSOL was used to simulate three cloaks with different material parameters ... En savoir plus
Solar Photovoltaics is an alternate green energy source to the depleting fossil fuel technologies. Solar energy cost needs to be reduced significantly for competitiveness and proliferation in residential solar. Thin film photovoltaics is a promising technology for the growth of solar ... En savoir plus
The plasma enhanced chemical vapor deposition process with a linear plasma source and the frequency range up to 140 MHz developed by Dresden University of Technology and FAP GmbH Dresden enables a fabrication of thin film silicon layers at very high deposition rates. However, an increase ... En savoir plus
