Consultez les proceedings de la Conference COMSOL 2024
Introduction: In this project, COMSOL Multiphysics® and SolidWorks® are employed to model and simulate a mechanically coupled MEMS resonator with varying masses. These resonators consist of three main components: springs on each end to allow the structure to move, a shuttle mass for ... En savoir plus
Nanoscale structural analysis and design is presented. All the simulations are carried out using a finite element solver and optimization is performed using parameter and topology optimization schemes. It is concluded that COMSOL is effective for analysis and design of nanoscale ... En savoir plus
When milk is taken out of a refrigerator it has to be heated up to 37°C. The standard solution is to put the bottle in a bath of warm water and wait. The goal is quickly to achive a uniform temperature of 37°C, without ever exceeding 40°C. Using COMSOL Multiphysics and a measurement ... En savoir plus
Adulteration of automobile fuels, especially petrol and diesel is a rampant malpractice in India. With the rising prices of fuel and the subsidy on kerosene, getting away with even 10-15% adulteration is immensely profitable.To check adulteration effectively, it is necessary to monitor ... En savoir plus
Surface plasmon resonance (SPR) sensors proved themselves as a promising device for many kinds of applications such as optical biosensing, binding constant determinationor nanofilm thickness measurements. Here we simulate using COMSOL Multiphysics® the light-polaritons coupling for the ... En savoir plus
Introduction: Inertial navigation requires acceleration measurement along all three degree-of-freedoms. Most accelerometers are designed to measure acceleration along a single sensitive direction. For complete inertial sensing, a move effective accelerometer which can sense ... En savoir plus
The simulation of a micromirror using polyimide as the structural material is presented. The simulation was used to verify the initial design parameters and to explore the different characteristics of the electromechanical device. For simulation simplicity the electrodes are integrated ... En savoir plus
In this work the authors report on a CFD simulation of a pipe flow model. Fluid mechanics are here combined with heat transfer phenomena. To create a mathematical model of a pulsed hot wire system i.e., the thermo-fluidic impulse response of a pulsed hot wire, a simulation model is going ... En savoir plus
The use of optical sensors in the industry is still growing. A transmission of signal from the sensors is mostly done by optical fibers. Switching the signals from optical paths may be done by using micromechanical silicon switches. The main advantage is an ability to transmit data from ... En savoir plus
In a first approach towards application of the magnetic frequency mixing technique to microfluidic structures, microplanar coils have to be designed along with sample reservoir. For this, a COMSOL Multiphysics® electrical model along with an analytical calculation is used in order to ... En savoir plus