- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
COMSOL Multiphysics® coupled with Solidworks® is employed to design, simulate and fabricate cartridges for a materials printer to accomplish in-situ curing of UV curable ink patterns as they are printed on flexible media for printed electronic circuit manufacturing. The cartridges ... En savoir plus
Laser powder bed fusion (LPBF) is one of the most beneficial manufacturing methods for its precision and ability to create parts with complex geometry, although high thermal gradient due to the considerable temperature difference between ambient and peak temperature appeared during laser ... En savoir plus
Started in March 2020, the SOFITT project (Saturated Open-Cell Foams for Innovative Tribology in Turbomachinery), funded by the ANR (French National Research Agency), aims to develop reliable, high-performance, and environmentally friendly solutions for the guidance and support systems ... En savoir plus
Activated carbon filtration has proven to be a reliable method to clean indoor air. In such a system, air, contaminated with VOCs, is led through the filter where the contaminants are adsorbed onto the filter. However, for the long term stability of the air purification system, it is ... En savoir plus
Obtaining a good coverage of Digital Audio Broadcasting (DAB) service, in the 200 MHz band, in motorway tunnels is quite a challenging task. Recently, Rai Research Centre (CRITS) has been involved in investigating alternative (and cheaper) solutions than those adopted so far (radiating ... En savoir plus
Geological repository for highly radioactive waste disposal is a system of engineered and natural barriers. The objective of this system is to contain and isolate waste and protect the environment and humans from ionizing radiation. For the evaluation of performance of engineered ... En savoir plus
There has been a great amount of interest in nanopores as the basis for sensors and templates for preparation of biomimetic channels as well as model systems to understand transport properties at the nanoscale. The presence of surface charges on the pore walls has been shown to induce ... En savoir plus
This article reports the design of a high-power ultrasound system, capable of emitting acoustic radiation at 20kHz with SPL peaks up to 160dB at a distance of up to 1m. The main problem of high power airborne ultrasonic systems lies in the acoustic impedance mismatch between the radiator ... En savoir plus
In order to reduce the environmental footprint of a serial production of head lamps, one lever is to replace and employ new materials, often requiring to redesign the product to ensure its mechanical and thermal resistance. In this context, this paper studies the modelling of the heat ... En savoir plus
During the hot extrusion process, a cylindrical pre-heated billet is inserted into a container and is forced by a hydraulic press to flow through a shaped die in order to obtain, as final product, a profile with a constant cross-section (Fig.1). Aluminum extrudates have become prominent ... En savoir plus