- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
The primary interest of the VC (Vacuum Characterization) test is to experimentally characterize the adsorption and vacuum desorption of CO2 and water vapor of a pelletized sorbent bed in a large diameter column. The VC test article is shown in Figures 1 and 2. The aluminum canister is 3” ... En savoir plus
Laser-Heated Pedestal Growth (LHPG) is a crystal growth technique that employs a focused laser beam to melt a source material, creating a molten zone that is precisely controlled to produce high-quality single crystals. This method is particularly advantageous for growing crystals with ... En savoir plus
While the processes taking place in a bubble reactor are simple to describe in a few sentences it is much more difficult to give a physical description that is useful for engineering purposes. A better understanding of a cluster of bubbles dissolving in a liquid where the species ... En savoir plus
In the context of climate change mitigation, hydrogen represents a promising and versatile energy vector. Water electrolysis powered by renewable energy offers a sustainable method for hydrogen production, with efficiency gains achievable at the higher operating temperatures of Solid ... En savoir plus
CO2 capture and further conversion into valuable products can be a promising solution against global warming. Normally, CO2 conversion can be achieved by chemical methods, by photocatalytic and electrocatalytic reduction [1]. Specifically for electrocatalytic reduction of CO2, challenges ... En savoir plus
Power-to-gas is an important area of research for reducing greenhouse gases and seasonal energy storage. Methane, with a Lower Heating Value of 50 MJ/kg, is already a commonly used gas, and its synthesis using green hydrogen production (electrolysis of renewable energy) is a remarkable ... En savoir plus
Injection conditions of CO2 at the wellhead may play a major role on the flow behavior through the wellbore. The density and the injection rate reached at the bottomhole are key factors affecting the performance and efficiency of CO2 geological storage. In this work, a model of non ... En savoir plus
The Thermo- Gravimetric Apparatus (TGA) is often used for kinetics determination. In TGA setup, gasification reaction may be limited by the reach (diffusion) of the gasification agent to the internal surfaces of the char particles. In addition to this, after some time, ash is formed ... En savoir plus
The modern microjet engine industry faces an ultimate constraint - a lack of physical platform for innovation, a need to completely develop new, existing technology to eventually test theory. Hence our proposal and development of a framework micro jet engine to be used as a platform for ... En savoir plus
The capture and storage of CO2 in deep geological formations is one of the proposed solutions to reduce CO2 emissions to the atmosphere. CO2 is injected as a supercritical fluid deep below a confining geological formation that prevents its return to the atmosphere. A configuration of ... En savoir plus
