Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Effect of Channel Width on Fuel Cell Performance Using 3D Modelling

R. Pushpangadan, S. S. Dimble, and S. P. Duttagupta
IIT Bombay
Mumbai
Maharasthra, India

A three Dimensional model of the PEM Fuel cell is implemented using COMSOL Multiphysics and the channel width is varied to study the performance.Effect of channel width on the performance of the cell is studied by varying the width of the channel and keeping channel width to rib ratio ... En savoir plus

Simulation of the Temperature Profile During Welding with COMSOL Multiphysics® Software Using Rosenthal's Approach

A. Lecoanet[1], D. G. Ivey[1], H. Henein[1]
[1]Department of Chemical & Materials Engineering, University of Alberta, Edmonton, AB, Canada

A 3D finite element analysis is carried out, using COMSOL® software, to reproduce the thermal profile obtained with Rosenthal’s equation. The implemented heat transfer equation has been modified as a means to approximate Rosenthal’s solution. An analysis of the differences between the ... En savoir plus

Topology Optimization of Thermal Heat Sinks

J. H. K. Haertel [1], K. Engelbrecht [1], B. S. Lazarov [2], O. Sigmund [2],
[1] Technical University of Denmark, Roskilde, Denmark
[2] Technical University of Denmark, Kgs. Lynby, Denmark

Introduction The topology optimization method is becoming increasingly popular as a design tool for multiphysics systems [1,2]. Topology optimization of fluid-thermal systems has been presented for example in [3] for forced convective heat transfer and in [4] for natural convection ... En savoir plus

Topology Optimization of an Actively Cooled Electronics Section for Downhole Tools

S. Soprani [1], J. H. K. Haertel [1], K. Engelbrecht [1], B. S. Lazarov [2], O. Sigmund [2]
[1] Technical University of Denmark - Department of Energy Conversion and Storage, Roskilde, Denmark
[2] Technical University of Denmark - Department of Mechanical Engineering, Lyngby, Denmark

INTRODUCTION: Active cooling systems represent a possible solution to the electronics overheating that occurs in downhole tools operating on wireline, a cabling technology used to remotely control the downhole devices during oil and gas well interventions, in high temperature wells (150 ... En savoir plus

Inverse Problem and a New Device to Estimate Thermal Conductivity of Composite Phase Change Material

M. Karkri [1], A. Nachaoui [2]
[1] Université Paris-Est, CERTES, Créteil Cedex, France
[2] Département de Mathématiques 2, Nantes Cedex, France

A new experimental device has been developed in order to characterize the phase change material (PCM) thermal properties (thermal conductivity k, sensible and latent heat thermal energy storage, cp and Lf) in the solid phase, during the solid-liquid transition and in the liquid phase. It ... En savoir plus

Magnetic and Circuital Modeling of a Low Harmonic Pollution Three Phase Transformer

E. Scotoni[1], C. Tozzo[2], D. Zoccarato[1], F. Paganini[1]
[1]TMC Italia, Busto Arsizio, Italy
[2]COMSOL, Brescia, Italy

A three phase transformer with very low harmonic pollution transferred back to power line is here presented. In fact, thanks to the described setup, intermediate harmonics (5th and 7th) are not going out back to the power line feeding the primary. These results has been extensively ... En savoir plus

Modeling Electric Fields in Slit Capillary Array Fluidic Actuators with Complex Electrode Geometries

J. Frey[1], A. Droitcour[1], D. Laser[1]
[1]Wave 80 Biosciences, San Francisco, CA, USA

With their small size, low manufacturing cost, fast transient response, and capacity to generate fluid power directly from small electrical power sources, microdevices incorporating electroosmostic flow (EOF) have wide-ranging applications, including newly developed high-performance ... En savoir plus

Modeling a Nozzle in a Borehole

E. Holzbecher[1], F. Sun[1]
[1]Georg-August Universität Göttingen, Göttingen, Germany

Within a borehole a nozzle can be installed in order to increase the efficiency of fluid injection. The position of the nozzle is located near the perforated casing of an injection well. A COMSOL Multiphysics® model is set up for a typical nozzle design as applied in practice. The model ... En savoir plus

Electrical Scale-Up of Metallurgical Processes

R. Schlanbusch[1], S. A. Halvorsen[1], S. Shinkevich[1], D. Gómez[2]
[1]Teknova, Kristiansand, Norway
[2]Department of Applied Mathematics & ITMATI, Universidade de Santiago de Compostela, La Coruña, Spain

The problem under investigation is electrical scale-up of a generic metallurgical process for primary metal production through resistive heating of slag by electric current, typically supplied by an AC three-phase system. Maxwell’s equations are analyzed revealing that the properties of ... En savoir plus

Influence of Inlet Fluctuations on the Development of The Turbulent Two-Stream Mixing Layer

J. Tawfik, and R. Arimilli
The University of Tennessee, Knoxville, TN, USA

The finite element method applied to the k-epsilon turbulence model is used to investigate the two-stream turbulent mixing layer. Whereas the model is known as one of the most popular of the turbulence models to date, the model has yet to be applied to the classical mixing layer problem ... En savoir plus

Premier

501–510 of 646

Dernier