Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Modeling Convection during Melting of a Phase Change Material

D. Groulx, and R. Murray
Mechanical Engineering
Dalhousie University
Halifax, NS
Canada

COMSOL Multiphysics can be used to model a latent heat energy storage system. A 2D numerical study was performed to simulate melting of a PCM including both conduction and convective heat transfer. The heat transfer in fluids and laminar flow physics interfaces were used. To model ... En savoir plus

Smoothing the Path to Simulation-Led Device Design

B. Pryor, and R. Pryor
Pryor Knowledge Systems
Bloomfield Hills, MI

Using modeling software such as COMSOL Multiphysics during the design phase, an approach called “simulation-led design”, allows ideas to be both inspired and validated by the use of simulations. Then, using simulations after the product is designed can shorten the prototype-testing ... En savoir plus

Material Selection and Computational Analysis on DOHC V16 Engine’s Mounting Bracket Using COMSOL Multiphysics

M. V. A. Nag[1]
[1]G.R.I.E.T., Hyderabad, AP, India

Reduction of the engine vibration and the dynamic forces transmitting from engine to the automotive body structure has always been an important part of automotive research. Automobile engineers face the task of creating a mechanism to absorb these vibrations and provide a smooth ride. ... En savoir plus

A Fully Coupled Three-Dimensional Dynamic Model of Polymeric Membranes for Fuel Cells

P. Alotto[1], M. Guarnieri[1], and F. Moro[1]

[1]Dipartimento di Ingegneria Elettrica, Università di Padova, Padova, Italy

The proton exchange membrane is a key component in the currently widely studied Proton Exchange Membrane Fuel Cells. In this paper a fully coupled three-dimensional dynamic numerical model of the membrane including all the physically relevant phenomena, i.e. ion transport, hydration ... En savoir plus

Modeling Cavity Growth in Underground Coal Gasification

A. Sarraf Shirazi, J. Mmbaga, and R. Gupta
University of Alberta
Edmonton, AB
Canada

Underground coal gasification (UCG) has received renewed interest due to its potential for utilization of the vast amounts of coals available in deep underground seams and the current drive towards clean coal utilization. UCG process involves the reaction between air/steam and coal in ... En savoir plus

Homogeneous Heating of Milk

A. Stahel, and A. Reichmuth
Berner Fachhochschule
Biel, Switzerland

When milk is taken out of a refrigerator it has to be heated up to 37°C. The standard solution is to put the bottle in a bath of warm water and wait. The goal is quickly to achive a uniform temperature of 37°C, without ever exceeding 40°C. Using COMSOL Multiphysics and a measurement ... En savoir plus

A Study on Nutrient Mass Transport through Porous Channeled Flat Sheet Membrane and Prediction of Maximum Scaffold Thickness for Viable Cell Culture (In-vitro) by 3D Modeling for Tissue Engineering Application

N. M. S. Bettahalli[1], B. J. Papenburg [2], D. S. Stamatialis [2], M. Wessling [3]
[1]University of Twente, Enschede, The Netherlands & BMS College of Engineering, Bangalore, India
[2]University of Twente, Enschede, The Netherlands
[3]RWTH Aachen University

Tissue engineering (TE) is a multidisciplinary field involving principles of engineering and life sciences to improve the health and quality of life by repairing, restoring, maintaining, or enhancing tissue and organ function using cells, scaffolds, and growth factors alone or in ... En savoir plus

Theoretical Investigation of CMH Lamps Ignition Properties in Ar/Hg Penning Gas Mixtures

Sz. Beleznai[1], I. Maros[2]
[1]Budapest University of Technology and Economics, Budapest, Hungary
[2]General Electric Lighting, GE Hungary KFT, Budapest, Hungary

Two-dimensional plasma transport model was developed in COMSOL Multiphysics Plasma Module to investigate fundamental issues in ceramic metal halide (CMH) lamps starting using Ar/Hg penning gas mixture. The intent of this work is to provide insight into possible design rules that might be ... En savoir plus

Fluid Leakage Across a Pressure Seal

R. P. Ruby[1], G. Kulkarni[2], U. Kanade[1]
[1]Noumenon Multiphysics Pvt. Ltd., Pune, Maharashtra, India
[2]Oneirix Engineering Laboratories Pvt. Ltd., Pune, Maharashtra, India

Seals or gaskets that are compressed between walls of a container are important to many industrial applications. In this paper we present a fluid flow model for predicting the sealing performance of such seals. A computational study using COMSOL Multiphysics® software suggests very ... En savoir plus

Uncertainty of FEM Solutions Using a Nonlinear Least Squares and Design of Experiments Approach

J. T. Fong [1], N. A. Heckert [1], J. J. Filliben [1], P. V. Marcal [2], R. Rainsberger [3]
[1] National Institute of Standards and Technology, Gaithersburg, MD, USA
[2] MPACT Corp., Oak Park, CA, USA
[3] XYZ Scientific Applications, Inc., Livermore, CA, USA

Uncertainty in COMSOL Multiphysics® software simulations due to (a) model parameter uncertainties and (b) mesh-induced truncation errors, is estimated using a design-of-experiments approach [1, 2, 3], and a nonlinear least squares logistics fit method [4, 5], respectively. Examples to ... En savoir plus

Premier

521–530 of 646

Dernier