- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Consultez les proceedings de la Conference COMSOL 2024
Over the past few decades, nano/micro-mechanical resonators have experienced tremendous improvements in measurement sensitivity. In order to ensure accuracy, it is crucial that each nano/micro-mechanical device is properly calibrated. Thermomechanical calibration provides a noninvasive ... En savoir plus
VRALA is the ideal candidate as an Adaptive Optics actuator at visible wavelengths. Its electric characteristics variations, suitable current commands, and an effective magnetic circuit geometry provide a 2 kHz correction bandwidth and a 25 mm actuator density. The magnetic core allows ... En savoir plus
Circuit board failures are often ignored because they could be impreceptible. This simulation examines how internal layers around a soldered pin via subject to temperature changes during the soldering process are affected, show the forces involved and determine breaking points. A 2D ... En savoir plus
This paper describes the use of COMSOL Multiphysics® during the design of a vented box loudspeaker. Templates have been created to model the different needs of a complete design. Based upon those templates a box has been prototyped, measured and confronted to simulation. The cabinet may ... En savoir plus
This paper presents finite element method (FEM) simulation study of the generation of bulk acoustic waves (BAWs) and their effect on the performance of surface acoustic wave (SAW) devices, using COMSOL Multiphysics. A SAW delay line structure using YZ-cut lithium niobate substrate is ... En savoir plus
The main aim of the present work is the study of the thermal and energy performances of the new hall of the Old St.Maria Nuova Hospital in the center of Florence (Italy). Transient simulations were carried out of the 3D model of the hall to analyse the air flow patterns, distribution and ... En savoir plus
In this project, we report a design of MEMS microphone that is based on the application of porous silicon in improving the sensitivity of bulk micro machined capacitive pressure sensors. The property of a low Young’s modulus of porous silicon and its dependence on porosity have been ... En savoir plus
There has been growing demand for high performance micro sensors capable of detecting nuclear radiations being released from various industries, Nuclear reactors. Radiations emitted from the radioactive materials are invisible and not directly detectable by human senses. Thus it is ... En savoir plus
Heterogeneous materials with different phases, are conductive and insulating (dielectric), and are physically present in different natural materials as e.g. atmospheric ice. Jonscher’s proposed ‘universal dielectric response’ is not sufficient for such materials, as it only reflects ... En savoir plus
The silicon diaphragm is one of the most common structures in Micro-Electromechanical Systems (MEMS). However, it is susceptible to creep deformation at elevated temperatures. This paper presents a transient finite element model which simulates the mechanical behavior of the ... En savoir plus
