Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Electrical Simulation and Current Spreading Analysis in the GaN-based Light-Emitting Diode Devices

J. Chen
Mechanical Engineering
National Central University
Taiwan

Numerical simulations can well predict the electric current and temperature distribution in GaN-based LED chips. It can be used to improve the device design and optimization of the LED devices. Future work will include the optical modeling to analyze the optical properties of the LED ... En savoir plus

Progress in Numerical Simulation of HIIPER Space Propulsion Device

P. Keutelian[1], A. Krishnamurthy[1], G. Chen[1], B. Ulmen[1], G.H. Miley[1]
[1]University of Illinois at Urbana-Champaign, Champaign, IL, USA

HIIPER is an experimental space propulsion device using a helicon and an IEC as a plasma generation and acceleration stage, respectively. There is an experiment in progress, but for true rapid iteration and to model the performance of the engine, COMSOL is a strong candidate for ... En savoir plus

The Fast Model for Ionic Wind Simulation

A. Samusenko[1], Yu. Stishkov[1], P. Zhidkova[1]
[1]Saint Petersburg State University, Research and Educational Center “Electrophysics”, St Petersburg, Russia

Ionic wind is the gas flow induced by the corona discharge. Ions produced by corona are accelerated by electric field and transfer their momentum to neutral molecules. Using ionic wind one can convert electric energy to kinetic energy of air flow almost directly. The phenomenon of ionic ... En savoir plus

Modeling of Usage of Air Injection Well in a Geothermal System

X. Ma[1] and J. Grabe[1]

[1]Institude for Geotechnics and Construction Management, Hamburg University of Technology, Hamburg, Germany

Natural groundwater flow can increase the efficiency of geothermal system. But groundwater flow is not available everywhere. A patented new idea is to use air injection well to create artificial flow in sandy or gritty soils. The governing equations of fluid flow and heat transfer ... En savoir plus

Definition of Optimization Problem for Electromagnetic Linear Actuator

P. Piskur[1], W. Tarnowski[1], and K. Just[1]

[1]Koszalin Technical University, Koszalin, Poland

In this paper a poly-optimization of the design of the electromechanical actuator is presented. The shape of the actuator is defined by the decision variables. The number of decision variables under consideration is up to ten but in the next step while the multi-coils system will be ... En savoir plus

RFID-Enabled Temperature Sensor

I.M. Abdel-Motaleb[1], K. Allen [1]
[1]Department of Electrical Engineering, Northern Illinois University, DeKalb, IL, USA

The design of a RFID-enabled temperature sensor is described in this paper. In this sensor, a change in temperature causes structural beams to bend, which results in a proportional displacement of the plates of the capacitor. Plates\' displacement results, in turn, in changing the value ... En savoir plus

Three Dimensional Modeling of PEM Fuel Cells with Current Collection from the Gas Diffusion Layer

R. Pushpangadan[1], A. Soman[2], Arundas R.[2], N. G. Thoppan[2], S. P. Duttagupta[1]
[1]Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India
[2]College of Engineering, Munnar, Kerala, India

PEM fuel cells are very promising for portable applications. A key component of fuel cell is the flow field plate through which hydrogen will reach the anode, oxygen will reach the cathode and electron collection. Flow field plate made of silicon is not a good electrical conductor , so ... En savoir plus

Identification of the Complex Moduli of Orthotropic Materials using Modal Analysis

F. Van den Abeele[1], J.R. De Oliveira Jr.[2], and F.J. Huertos[1]
[1]OCAS N.V., J.F. Kennedylaan 3, Zelzate, Belgium
[2]Federal University of Minas Gerais, Belo Horizonte, Brazil

It is very difficult to measure the global properties of heterogeneous and anisotropic materials like composites and sandwich structures. When designing composite sandwich applications, the elastic properties are required to perform structural stiffness and strength calculations. ... En savoir plus

Finite Element Approach for Optimizing the Cooling of the Metallic Bipolar plates for Fuel Cell Applications

E. Firat[1,2], C. Siegel[1,2], L. Kühnemann[1,2], P. Beckhaus[1], and A. Heinzel[1,2]
[1]Zentrum für Brennstoffzellentechnik (ZBT) GmbH, Duisburg, Germany
[2]University of Duisburg Essen, Duisburg, Germany

Metallic bipolar plates promise several advantages for fuel cell applications. On the other hand, cooling of these plates is a critical task regarding design optimization. The high thermal conductivity of the material and the complex geometry of these plates affect directly the cooling ... En savoir plus

COMSOL Implementation for Upscaling of Two-Phase Immiscible Flows in Communicating Layered Reservoirs

X. Zhang, A. Shapiro, and E.H. Stenby
Center for Energy Resources Engineering, Technical University of Denmark, Lyngby, Denmark

Waterflooding is widely used in secondary oil recovery. The physics is described by the model of two-phase flow in porous media. The aim of the present work is to implement this model in COMSOL Multiphysics and to simulate the process of waterflooding. It is analyzed in two dimensions. ... En savoir plus

Premier

541–550 of 646

Dernier