- Bridging the Terahertz Gap
- Modeling the Lithium-Ion Battery
- Protection contre la Corrosion
- Modélisation des batteries
- Modélisation et Simulation dans le développement des piles à combustible
- Modélisation thermique des petits satellites
- Analyse électro-vibroacoustique d'un transducteur à armature équilibrée
Découvrez comment la simulation multiphysique contribue à faire progresser la recherche dans le monde entier grâce à des applications innovantes
La modélisation et la simulation multiphysiques stimulent l'innovation dans l'industrie et le monde universitaire, comme en témoignent les nombreuses applications présentées chaque année par des ingénieurs, des chercheurs et des scientifiques dans leurs articles techniques et posters lors des conférences COMSOL.
Inspirez-vous des travaux présentés lors des dernières conférences, rassemblés ci-dessous. Pour trouver une présentation en particulier ou affiner votre recherche par domaine d'application, année ou lieu de conférence, utilisez l'outil de recherche rapide.
Consultez les proceedings de la Conference COMSOL 2026
A set of microstructures for in situ stress measurement is presented, based on a lancet principle having dedicated designs for the amplification of dimensional variation induced by internal stress of the materials. The presented technique has an advantage over the traditional rotating ... En savoir plus
Three-dimensional finite element (FE) modeling of magnetic flux leakage (MFL) technique has been performed using COMSOL 3.4 for prediction of leakage fields from surface and sub-surface defects in a 12 mm thick carbon steel plate. The tangential and normal components of leakage fields ... En savoir plus
Recently adsorptive storage has been identified as the most promising low-pressure (3.5 - 4.0 MPa) alternative for storing natural gas for vehicular use. However in order to successfully implement this technology, the filling and discharge characteristics of the adsorbent bed must be ... En savoir plus
In this paper, a piezoelectric cantilever is investigated using finite element analysis made possible by COMSOL Multiphysics for the generation of electrical energy. A micro power generator was designed to convert mechanical vibrations present in the environment to electrical power. The ... En savoir plus
Ultrasonic Testing (UT) is one of the important Non-Destructive Evaluation (NDE) technique widely used for characterisation of materials as well as detection and characterisation of flaws present in the material used in various industries. There are many different important materials ... En savoir plus
Microheaters have been widely investigated because of their extensive applications in gas sensors, flow rate sensors and other Microsystems. The geometric optimization for the microheater was performed by simulating a wide range of possible geometries using COMSOL Multiphysics, a ... En savoir plus
Atherosclerosis in arteries is caused by the formation of stenosis : fatty depositions, on the artery wall. In current medicine, the practice is to observe the maximum percentage occlusion at any arbitrary cross-section and diagnose the patient on that basis, which might not always ... En savoir plus
This paper describes consecutive stages of design and construction of electromagnetic gun manufactured at the Silesian University of Technology. It gives insight into current knowledge about such a launcher. The computer model was elaborated in COMSOL Multiphysics version 3.5. The ... En savoir plus
