Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Ici vous trouverez les présentations issues des Conférences COMSOL à travers le monde. Réalisées par des utilisateurs de COMSOL Multiphysics, ces présentations explorent tous les domaines actuels d'innovation. Les applications couvrent pratiquement tous les secteurs industriels et impliquent des phénomènes électriques, mécaniques, fluidiques et chimiques. Utilisez la recherche rapide pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Use of COMSOL In Aerodynamic Optimization of the UNLV Solar-Powered Unmanned Aerial Vehicle

L. Dube, W. McElroy, and D. Pepper

University of Nevada, Las Vegas, Nevada, USA

We discuss the use of COMSOL Multiphysics 3.4 in the aerodynamic optimization process of the UNLV solarpowered UAV. We also address the use of COMSOL’s Multiphysics ability and how it was used within the scope of the project. In particular we highlight the development of wingtip devices, ... En savoir plus

Electrohydrodynamic Micropump Modeling for Performance Optimization

A. Mulye[1], S. Potnis[2]
[1]Northeastern University, Boston, MA, USA
[2]VIT, Mumbai, Maharashtra, India

We present an optimized and efficient design of an electrohydrodynamic (EHD) micropump for high performance in microscale and biological applications. We are targeting two major applications, a parylene C design for electrically-actuated medicine delivery, and a silicon-based pump design ... En savoir plus

Study of the CO2 Transfer Rate in a Reacting Flow for the Refined Sodium ...

Study of the CO₂ Transfer Rate in a Reacting Flow for the Refined Sodium Bicarbonate Production Process

C. Wylock[1], A. Larcy[1], P. Colinet[1], T. Cartage[2], and B. Haut[1]
[1]Université Libre de Bruxelles, Brussels, Belgium
[2]Solvay S.A., Brussels, Belgium

This work deals with the quantification of the CO2 transfer rate from a bubble to the surrounding liquid in a bubble column. A model is successfully developed using COMSOL Multiphysics. The validated model is used to study the enhancement influence of chemical reactions on the transfer ... En savoir plus

Newtonian and Non-Newtonian Blood Flow over a Backward-Facing Step: Steady-State Simulation

M.W. Siebert[1], and P.S. Fodor[1]
[1]Physics Department, Cleveland State University, Cleveland, Ohio, USA

In this work, the fluid flow over a 2D backward-facing step is analyzed in order to provide a case study for the use of different models for the blood dynamic viscosity in COMSOL Multiphysics. Three non-Newtonian models, as well as the Newtonian model are used to study the shear stresses ... En savoir plus

Determination and Verification of the Forchheimer Coefficients for Ceramic Foam Filters using COMSOL CFD Modeling

M.W. Kennedy[1], K. Zhang[1], J.A. Bakken[1], R.E. Aune[1]
[1]Norwegian University of Science and Technology, Trondheim, Norway

Experiments have been conducted with water at velocities from ~0.015-0.77 m/s to determine the permeability of 50 mm thick commercially available 30, 40, 50 and 80 Pores Per Inch (PPI) Ceramic Foam Filters (CFF) used for liquid metal filtration. Measurements were made using two different ... En savoir plus

Numerical and Experimental Analysis of Natural and Mixed Convection Heat Transfer for Vertically Arranged DIMM

G. Petrone, and G. Cammarata
University of Catania, Catania, Italy

It is commonly recognized that careful thermal design of electronic equipments represents an unavoidable pre-production step in order to ensure reliability and performance of those components during their functioning. This paper mainly concerns a comparison between experimental and ... En savoir plus

Simulation of Chromatographic Band Transport

B. Bunner , A. Kromidas , M. Kele , and U. Neue
Waters Corp, Milford, MA, USA

High-Performance Liquid Chromatography (HPLC) is a standard method in the pharmaceutical industry for the separation and identification of chemical compounds. Modeling of band transport, or band broadening phenomena, can provide tremendous insight into problems of chromatography that ... En savoir plus

Simulation of the Turbulent Flow in HEV Static Mixers : Mixing of Ethanol with Gasoline

A. Eissa[1]
[1]Department of Chemical Engineering, Cairo University, Giza, Egypt

Mixing is a typical unit operation that occurs almost in all chemical industries. Static – alternatively termed motionless – mixers are being widely used due to their low power consumption, low capital investment, minimal maintenance costs and versatility. The traditional helical mixing ... En savoir plus

Mixing and Residence Time Distribution Studies in Microchannels with Floor Herringbone Structures

A. Cantu-Perez, S. Ping Kee, and A. Gavriilidis
University College London, Department of Chemical Engineering, Torrington Place, London, UK

The mixing characteristics and residence time distributions (RTDs) of a staggered herringbone microchannel have been investigated numerically by COMSOL Multiphysics and by particle tracking algorithms that incorporate diffusion via a random walk. All simulations were validated with ... En savoir plus

Optimization of Product from a Segregated Reactor via a Hybrid Modeling Approach

E. Akgün [1], V. Souza [1], J. Appel [1]
Clariant Produkte (Deutschland) GmbH, Burgkirchen, Germany

In the field of chemical reaction engineering chemical kinetics and fluid dynamics are described by various mathematical approaches. Such tools help to shorten the time-to-market of novel products and processes. Thanks to the continuously improving computation power, it is possible to ... En savoir plus

Premier

571–580 of 1344

Dernier