Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Design of Passive Micromixers using the COMSOL Multiphysics software package

M. Itomlenskis, P. Fodor, and M. Kaufman

Physics Department, Cleveland State University, Cleveland, OH, USA

Relief patterning of the surface of microchannels has been actively pursued as a method of promoting mixing in systems with a low Reynold’s number (<<100). In this work, we explore, by using the COMSOL Multiphysics package and its Chemical Engineering Module, the possibility of ... En savoir plus

CFD Analysis of Argon Cell for Pyrochemical Processing

S. Agarwal[1], S. P. Ruhela[1], B. Muralidharan[1], B. P. Reddy[2], B. K. Sharma[1], K. Nagarajan[2], C. A. Babu[3], and K. K. Rajan[1]
[1]Fast Reactor Technology Group, Indira Gandhi Centre for Atomic Research
[2]Chemistry Group, Indira Gandhi Centre for Atomic Research
[3]HBNI & CDG, Indira Gandhi Centre for Atomic Research

An inactive Demonstration facility for the integrated pyroprocess, named High temperature Electrorefining (HTER) facility is in developing stage. This facility is equipped with several types of pyroprocess equipment such as electro-refiner, salt and cadmium distillation equipment, ... En savoir plus

The Use of CFD Simulations in Learning Fluid Mechanics at the Undergraduate Level

Marc K. Smith
Professor of Mechanical Engineering, Georgia Institute of Technology

Simple, accurate CFD simulations using COMSOL Multiphysics are used in a senior-level undergraduate course as a means to explore a number of fluid flows with the intent of developing a deep understanding of the underlying fluid mechanical mechanisms involved in the flows. Students also ... En savoir plus

Analysis Of Linearly Polarized Modes

I. Avram, and I. Gavril Tarnovan
The Technical University of Cluj Napoca
Cluj, Romania

This paper presents a study on the propagation modes of electromagnetic waves through a step index fiber optics. To analyze the propagation of electromagnetic field, a simulation in Comsol 4.0 has been implemented using two different optical fibers. Obtaining the propagation modes, ... En savoir plus

Design and Simulation of Electroactive Polymer-Based Artificial Muscles for Biomedical Application

A. S. Tripathi [1], B. P. Chatterjee [2], S. Das [3],
[1] Advanced Technology Development Centre, Indian Institute of Technology Kharagpur, Kharagpur, India
[2] Dept. of Cardiology, Medical College and Hospital, Kolkata, India
[3] School of Medical Science and Technology, Indian Institute of Technology Kharagpur, Kharagpur, India

Electro-active polymer (EAP) based actuators are one of the suitable contenders for use in artificial muscles based bio-medical application because of their bio compatibility and lower active actuation voltage requirement phenomenon. At present Ionic polymer metal composites (IPMC), a ... En savoir plus

Modeling of Viscous Fingering

E. Holzbecher[1]

[1]Georg-August University, Göttingen, Germany

Viscous fingering is a topic of interest since the beginning of computational fluid dynamics. Here we focus on the classical constellation of miscible displacement, as it has been investigated in Hele-Shaw cells. A temperature or salinity front is entering with a fluid that has a ... En savoir plus

Optimal Design for the Grating Coupler of Surface Plasmons

Y. Huang

Mathematics Department, University of California, Los Angeles, CA, USA

We present an optimization procedure to optimize the maximum coupling of free space optical wave to surface plasmon. Shape derivative from shape sensitivity analysis is calculated, and the corresponding partial derivatives of the objective functional with respect to finite number of ... En savoir plus

Laminar Fluid Flow and Heat Transfer Studies of an Electrical Conducting Fluid Subject to Combined Electric and Magnetic Fields

E. Gutierrez-Miravete[1], T. DePuy[2], and X. Xie[2]
[1]Rensselaer at Hartford, Hartford, CT
[2]Pratt & Whitney, East Hartford, CT

The flow of electrically conducting fluids such as liquid metals is significantly affected by applied electric and magnetic fields. The effect has important industrial applications in metallurgy, nuclear technology and other fields. This paper described results of a series of studies ... En savoir plus

Air Flow Characteristics Inside an Industrial Wood Pallet Drying Kiln

A-G. Ghiaus, M-A. Istrate, and A-M. Georgescu
Technical University of Civil Egineering, Bucharest, Romania

Analysis and optimization of air flow distribution inside drying kiln systems contribute to the improvement of the final product quality. The present study reports on the threedimensional numerical solution of air flow within a drying kiln enclosure. The air flow field is examined in ... En savoir plus

Atmospheric Icing of Transmission Line Conductor Bundles

T. Wagner[1], and U. Peil[2]
[1]International Graduate School of Risk Management of Natural and Civilization Hazards on Buildings and Infrastructure, Braunschweig, Germany
[2]Institute of Steel Structures, Technical University Braunschweig, Braunschweig, Germany

Hazardous for the transmission lines is not only the static ice load, but also the aerodynamic instability of iced cables. It can lead to large amplitude oscillations at low frequencies. Also, twisting due to asymmetrical iced cables may increase the fatigue rate. In extreme events, ... En savoir plus

Premier

591–600 of 1392

Dernier