Consultez les proceedings de la Conference COMSOL 2024
For the complex 3D biocompatible metallic parts, with high level of customization, used in medical prosthesis and implants Direct Metal Laser Sintering (DMLS) and Selective Laser Melting (SLM) are the most common Additive Manufacturing technologies used nowadays. However, both ... En savoir plus
The underwater electric potential (UEP) signature of naval vessels poses a severe threat as it is detectable by advanced sea mines. The signature depends also on the environment, mainly the water-seabed interface, leading in summary to the total UEP signature. The seabed has a ... En savoir plus
This paper presents a novel methodology towards the design, analysis, and the fabrication process involved in developing a cost effective method to create a piezoelectric actuator by means of the flexoelectric effect. The basic physical equations of the flexoelectric effect and the ... En savoir plus
Recently, the advanced plasma tools have been using very high frequency power sources (>100 MHz) and their combination to excite plasma utilized in semiconductor technology. This approach is evoking the regimes that are less understood and currently a subject to many studies and ... En savoir plus
Three-dimensionally varying flattened Luneburg Lens structure whose axisymmetric invariance of material parameters is calculated by conformal mapping, presents a numerical challenge for three dimensional modelling. To address this problem, conventionally a two dimensional quasi-conformal ... En savoir plus
当高温超导体内部出现温升时，其临界电流密度会发生改变。为探索这种温度效应对高温超导磁悬浮的影响，本文利用COMSOL软件，结合AC/DC 模块及传热模块，建立了悬浮于永磁轨道上方的高温超导块材二维实体模型，以磁轨的小幅振动模拟轨道不平顺。模型基于非连续性超导体E-J磁通流动与蠕动电磁本构关系，考虑不同温度-临界电流密度Jc(T)关系表达式，研究了高温超导块材在磁场不平顺激扰下的磁-热-力动态行为特性。并探究了不同Jc(T)关系对仿真模型求解效率及收敛性的影响。该工作将为高温超导磁悬浮磁-热效应及能量损耗问题的研究提供一定的仿真手段。 En savoir plus
The effect of plasmon-wavelength scaled gratings on the surface plasmon resonance is studied experimentally and theoretically. The model samples are multi-layers containing laser fabricated gratings at bimetal-polymer interfaces. Dual-angle dependent surface plasmon resonance ... En savoir plus
The problem of an unbalanced mechanical torque signal generation using nonpolar repulsion techniques is studied. To achieve such an unbalanced torque, several stator and rotor geometries, consisting of nonlinear permanent magnet spring batteries are investigated. It can be shown that an ... En savoir plus
Pyrometallurgical furnaces are used to produce metals such as copper, nickel and platinum by the smelting process. During smelting, the undesired material components are separated from the desired metal resulting in the formation of a slag and matte/metal phase. The slag phase ... En savoir plus
The photoacoustic (PA) effect consisting of the generation of an acoustic signal based on the absorption of light has already demonstrated its potential for various spectroscopic applications for both gaseous and solid samples. The signal produced during photoacoustic spectroscopy (PAS) ... En savoir plus