Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Numerical Simulation of the Effect of Inlet Design on Thermal Storage Tank Performance Using COMSOL Multiphysics®

W. Yaïci[1], M. Ghorab[1], E. Entchev[1]
[1]Natural Resources Canada, CanmetENERGY, Ottawa, ON, Canada

This study presented the results of 3D unsteady CFD simulations to investigate the influence of adding a flat baffle plate at the entrance during the discharging operation on the flow behaviour, thermal stratification, and performance of a hot water storage tank installed in solar ... En savoir plus

Numerical Modeling of Power Reactors' Fuel Bundles

R. Schmidt[1], T. Yousefi[2], B. Farahbaksh[2], M. Z. Saghir[2]
[1]University of Louisiana at Lafayette, Lafayette, LA, USA
[2]Ryerson University, Toronto, ON, Canada

Fuel bundles in the CANDU (CANada Deuterium Uranium) reactor are designed for heating a pressurized coolant (heavy water) to generate electricity. The designs for the fuel bundles differ based on the number of heating elements. The flow of heavy water over the elements and inside the ... En savoir plus

Design of Passive Micromixers using the COMSOL Multiphysics software package

M. Itomlenskis, P. Fodor, and M. Kaufman

Physics Department, Cleveland State University, Cleveland, OH, USA

Relief patterning of the surface of microchannels has been actively pursued as a method of promoting mixing in systems with a low Reynold’s number (<<100). In this work, we explore, by using the COMSOL Multiphysics package and its Chemical Engineering Module, the possibility of ... En savoir plus

Studying Transition Flows for Low Prandtl Number Fluids

H. Jamai[1], A. Elamari[1], M. El Ganaoui[2], F.S. Oueslati[1], B. Pateyron [2], and H. Sammouda[3]
[1]LETTM, Département of physics, F.S.T, Tunisie
[2]SPCTS UMR CNRS, Faculte of Sciences, Limoges, France
[3]ESST-H., Sousse, Tunisie

COMSOL Multiphysics is offering an important alternative to home codes for modeling and simulation of complex problems with including coupled effects on heat and mass transfer. The present work focuses on low Prandtl number fluid melts subject to symmetry breaking and transition to ... En savoir plus

Optimized Channel Geometry of a Flow-Focusing Droplet Generator for Parallelization

D. Conchouso[1], E. Al Rawashdeh[1], D. Castro[1], A. Arevalo[1], I.G. Foulds[1]
[1]King Abdullah University of Science and Technology, Thuwal, Saudi Arabia

This document presents the Computational Fluid Dynamics (CFD) simulation of a commonly used Microfluidic Droplet Generator (MFDG) using the Laminar Two-Phase Flow, Phase Field method in COMSOL Multiphysics®. The paper discusses the effect of the channel’s geometry in droplet size at ... En savoir plus

FEM Simulation for ‘Pulse-Echo’ Performances of an Ultrasound Imaging Linear Probe

L. Spicci[1]
[1]Esaote SpA, Florence, Italy

Pulse-echo FEM simulation is seldom found in literature for ultrasound imaging array probes, since the complete modeling of such device is extremely complicated. Nevertheless, the 2D FEM described in the present work was successful, thanks to the following design procedure (see figure): ... En savoir plus

Study of ER Non-equilibrium Behavior with COMSOL

L. Zhou
Fudan University, Shanghai, China

COMSOL Multiphysics is a powerful tool in theoretical study. Lei Zhou, Jiping Huang and other professors in Physics Department, Fudan University have achieved some exciting results of soft, tunable metamaterials. We use it to study non-equilibrium behavior of rhoeological (ER) fluids and ... En savoir plus

Optimization of Product from a Segregated Reactor via a Hybrid Modeling Approach

E. Akgün [1], V. Souza [1], J. Appel [1]
Clariant Produkte (Deutschland) GmbH, Burgkirchen, Germany

In the field of chemical reaction engineering chemical kinetics and fluid dynamics are described by various mathematical approaches. Such tools help to shorten the time-to-market of novel products and processes. Thanks to the continuously improving computation power, it is possible to ... En savoir plus

The Use of CFD Simulations in Learning Fluid Mechanics at the Undergraduate Level

Marc K. Smith
Professor of Mechanical Engineering, Georgia Institute of Technology

Simple, accurate CFD simulations using COMSOL Multiphysics are used in a senior-level undergraduate course as a means to explore a number of fluid flows with the intent of developing a deep understanding of the underlying fluid mechanical mechanisms involved in the flows. Students also ... En savoir plus

Using Temperature Signals to Estimate Geometry Parameters in Fractured Geothermal Reservoirs

F. Maier[1], P. Oberdorfer[1], I. Kocabas[2], I. Ghergut[1], M. Sauter[1]
[1]Dpt. Applied Geology, Center of Geosciences, Georg-August-University, Göttingen, Germany
[2]Petroleum and Natural Gas Engineering Department Batman, Batman University, Batman, Turkey

We compare the output of 2D single fracture models as well as analytical solutions of the problem. The temperature signal is evaluated with the heat transfer mode while the flow field is assumed to exhibit Darcy flow everywhere. The problem is time-dependent so we have to take into ... En savoir plus

Premier

631–640 of 1391

Dernier