Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Numerical Modeling of Power Reactors' Fuel Bundles

R. Schmidt[1], T. Yousefi[2], B. Farahbaksh[2], M. Z. Saghir[2]
[1]University of Louisiana at Lafayette, Lafayette, LA, USA
[2]Ryerson University, Toronto, ON, Canada

Fuel bundles in the CANDU (CANada Deuterium Uranium) reactor are designed for heating a pressurized coolant (heavy water) to generate electricity. The designs for the fuel bundles differ based on the number of heating elements. The flow of heavy water over the elements and inside the ... En savoir plus

Numerical Simulation of the Effect of Inlet Design on Thermal Storage Tank Performance Using COMSOL Multiphysics®

W. Yaïci[1], M. Ghorab[1], E. Entchev[1]
[1]Natural Resources Canada, CanmetENERGY, Ottawa, ON, Canada

This study presented the results of 3D unsteady CFD simulations to investigate the influence of adding a flat baffle plate at the entrance during the discharging operation on the flow behaviour, thermal stratification, and performance of a hot water storage tank installed in solar ... En savoir plus

Study of ER Non-equilibrium Behavior with COMSOL

L. Zhou
Fudan University, Shanghai, China

COMSOL Multiphysics is a powerful tool in theoretical study. Lei Zhou, Jiping Huang and other professors in Physics Department, Fudan University have achieved some exciting results of soft, tunable metamaterials. We use it to study non-equilibrium behavior of rhoeological (ER) fluids and ... En savoir plus

Multiphysics Topology Optimization of Heat Transfer and Fluid Flow Systems

E. Dede[1]
[1]Toyota Research Institute of North America, Ann Arbor, Michigan, USA

This paper is focused on topology optimization of heat transfer and fluid flow systems for multiphysics objectives. Specifically, COMSOL Multiphysics software is coupled with a method of moving asymptotes optimizer in a custom COMSOL / MATLAB script. Various physical process including ... En savoir plus

FEM Simulation for ‘Pulse-Echo’ Performances of an Ultrasound Imaging Linear Probe

L. Spicci[1]
[1]Esaote SpA, Florence, Italy

Pulse-echo FEM simulation is seldom found in literature for ultrasound imaging array probes, since the complete modeling of such device is extremely complicated. Nevertheless, the 2D FEM described in the present work was successful, thanks to the following design procedure (see figure): ... En savoir plus

Optimizing Bio-Inspired Flow Channel Design on Bipolar Plates of PEM Fuel Cells

X. Wang[1], J. Peitzmeier [2], and S. Kapturowski[3]
[1]Oakland University, Rochester, MI, USA
[2]Michigan Technological University, Houghton, MI, USA
[3]The State University of New York at Buffalo, Buffalo, NY, USA

The flow channel design on bipolar plates affects proton exchange membrane (PEM) fuel cell performance by influencing reactant distribution and water removal in an operating fuel cell. The fuel cell performance can be improved by varying the type, size, or arrangement of channels. Two ... En savoir plus

Using Temperature Signals to Estimate Geometry Parameters in Fractured Geothermal Reservoirs

F. Maier[1], P. Oberdorfer[1], I. Kocabas[2], I. Ghergut[1], M. Sauter[1]
[1]Dpt. Applied Geology, Center of Geosciences, Georg-August-University, Göttingen, Germany
[2]Petroleum and Natural Gas Engineering Department Batman, Batman University, Batman, Turkey

We compare the output of 2D single fracture models as well as analytical solutions of the problem. The temperature signal is evaluated with the heat transfer mode while the flow field is assumed to exhibit Darcy flow everywhere. The problem is time-dependent so we have to take into ... En savoir plus

Pore-Level Influence of Contact Angle on Fluid Displacements in Porous Media

H. Ali Akhlaghi Amiri[1]
[1]University of Stavanger, Stavanger, Norway

Wettability affects two-phase displacements in porous media by determining the microscopic distribution of fluids in pore spaces. The impact of wettability on transport properties at macro-scales has been widely addressed in literature; however a deeper understanding of wettability ... En savoir plus

Magnetic Fields and Materials for Medical Bone Reconstruction Assisted by Advanced Finite-Element Simulations

A. Sytcheva[1] and T. Herrmannsdörfer[1]
[1]Hochfeld-Magnetlabor Dresden, Forschungszentrum Dresden-Rossendorf, Dresden, Germany

We address the use of magnetic fields, forces, and materials for medical purposes. In particular, the treatment of osteochondral lesions is aimed for. To support ongoing activities in this field of research, last advances in using Finite Element Analysis (FEA) for the simulation of ... En savoir plus

Propagation Of Tsunamis Over Large Areas Using COMSOL

C. Cecioni, and G. Bellotti
University of Roma TRE, DSIC, Rome, Italy

This paper presents a numerical model based on the mild-slope equation (MSE for short) solved using the PDE mode of the software COMSOL Multiphysics suitable to reproduce the propagation of small amplitude tsunamis in the off-shore field. The model solves the governing equations in the ... En savoir plus

Premier

661–670 of 1392

Dernier