Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Simulation of Adsorption Mechanisms of Methane and Carbon Dioxide in Shale Matrix

J. G. Moreira [1], A. L. Manriquez [1],
[1] Texas A&M University - Kingsville, Kingsville, TX, USA

The aim of this research is to contribute with the development of Carbon Capture and Storage techniques by studying carbon dioxide (CO2) adsorption mechanisms in shale reservoirs. Gas desorption is considered a major gas production mechanism and has a relevant role in shale gas ... En savoir plus

Effect of Duty Cycle Variation on Acoustic Pressure Field Simulation in an Ultrasound Bioreactor

A. Rahimi [1], J. Crapps [1], N. Case [1]
[1] Biomedical Engineering, Saint Louis University, Saint Louis, MO, USA

Daily application of a low intensity pulsed ultrasound (LIPUS) regimen has been shown to have positive effects on bone fracture healing. Although LIPUS treatment can induce cellular responses supporting bone repair, the underlying mechanisms are not well understood. Further in vitro ... En savoir plus

Paleohydrogeological Reactive Transport Model of the Olkiluoto Site (Finland)

M. Luna[1], P. Trinchero[1], J. Molinero[1], J. Löfman[2], P. Pitkanen[3], L. Koskinen[3]
[1]Amphos 21 Consulting, Barcelona, Spain
[2]VTT Energy, Espoo, Finland
[3]Posiva, Eurajoki, Finland

The safety assessment of the deep geological repository for nuclear waste of Olkiluoto (Finland) requires the evaluation of the influence of the land uplift (ice withdrawal) in groundwater. With this objective in mind, we have developed a three dimensional reactive transport model of ... En savoir plus

Permeability in Fragmented Materials and its Application to Underground Mining

S. Palma [1], R. Castro [1], A. Hekmat [1],
[1] Mining Engineering Department, Block Caving Laboratory, University of Chile, Santiago, Chile

The block caving mine is considered by the mining industry as one of the natural replacements of the current open cut mines in the near future. The block caving technique is based on the extraction of small broken rocks, created by blasted initially large solid rocks, and the fracture of ... En savoir plus

Mazar’s Damage Model for Masonry Structures: a Case Study on an Italian Church

M. Mori [1], A. De Falco [1], G. Sevieri [2],
[1] Università di Pisa, Italy
[2] Università di Firenze, Italy

Structural safety assessment of cultural heritage masonry structures plays an important role in safeguarding their integrity and conservation. In this regard, masonry modeling is one of the most challenging tasks, since an accurate reproduction of its mechanical behavior is necessary to ... En savoir plus

A Coulomb Stress Model to Simulate Induced Seismicity Due to Fluid Injection and Withdrawal in Deep Boreholes

G. Perillo[1], G. De Natale[2], C. Troise[2], A. Troiano[2], M.G. Di Giuseppe[2], A. Tramelli[2]
[1]University of Naples Parthenope, Naples, Italy
[2]INGV, Osservatorio Vesuviano, Naples, Italy

Fluid injection and withdrawal in deep wells is a basic procedure in mining activities and deep resources exploitation, i.e. oil and gas extraction, geothermal exploitation, geothermal permeability enhancement and waste ?uid disposal. All these activities have the potential to induce ... En savoir plus

Simulation of Laser Powder-bed Fusion Additive Manufacturing Process Using the COMSOL Multiphysics® software

K. Leung [1], A. Imanian [1],
[1] Technical Data Analysis, Inc., Falls Church, VA, USA

Additive manufacturing technology is becoming more popular for the fabrication of metal products as it offers rapid prototyping and large design freedom. However, part quality of components fabricated by current additive manufacturing technology is not comparable to that produced by ... En savoir plus

Mechanical Damage Models for Concrete

M. Laviña [1], A. Idiart [1],
[1] Amphos 21 Consulting S.L., Barcelona, Spain

Damage models can be used to simulate the quasi-brittle behaviour of cementitious materials, since they can represent cracking in a smeared-way under various loading conditions. COMSOL Multiphysics® developed a functionality to access external material models for structural mechanics in ... En savoir plus

Simulation of Deep Geothermal Heat Production

E. Holzbecher, P. Oberdorfer, F. Maier, and Y. Jin
Georg-August Universität Göttingen
Göttingen, Germany

Geothermal heat production from deep reservoirs (5000-7000 m) is currently examined, not only in Germany. Our reference set-up consists of two pipes within a single borehole: one for pumping. We examine a design, where a single borehole splits into two legs at a certain depth. The two ... En savoir plus

Using Temperature Signals to Estimate Geometry Parameters in Fractured Geothermal Reservoirs

F. Maier[1], P. Oberdorfer[1], I. Kocabas[2], I. Ghergut[1], M. Sauter[1]
[1]Dpt. Applied Geology, Center of Geosciences, Georg-August-University, Göttingen, Germany
[2]Petroleum and Natural Gas Engineering Department Batman, Batman University, Batman, Turkey

We compare the output of 2D single fracture models as well as analytical solutions of the problem. The temperature signal is evaluated with the heat transfer mode while the flow field is assumed to exhibit Darcy flow everywhere. The problem is time-dependent so we have to take into ... En savoir plus

Premier

51–60 of 176

Dernier