Articles techniques et présentations

Vacuum window is required in the millimeter wave transmission line in ITER*. It is to be designed to minimize the microwave reflection while keeping a robust and safe approach to meet the requirements. We have studied transmission characteristics of various dielectric materials over D ... En savoir plus

Engineering design has long been dominated by orthogonal Cartesian principles. Nature inspired equation based mathematical surfaces are under renewed interest due to their innovative design potential and practical viability by 3D printing. In this paper, the parametric surface ... En savoir plus

复合型电磁轨道发射装置是轨道型电磁发射器研究的一个重要方向，复合型轨道是对轨道的内表面添加保护层，由于电磁轨道在发射时存在复杂的热量变换，轨道表面材料在吸收这些热量之后会发生脱落、气化甚至是电离等现象。为减弱在发射过程中的烧蚀现象，在轨道的表面添加保护层，使轨道内表面材料具有强的耐热性能，并且强度、韧性较好。运用 COMSOL Multiphysics® 软件仿真模拟复合轨道在发射过程中的温度、电流、应力和应变的变化。 En savoir plus

Microwave technology has provided with many exciting new therapeutic and diagnostic methods. Frequencies from RF as low as 400 kHz through microwave frequencies as high as 10 GHz are presently used for therapeutic applications in areas such as cardiology, urology, surgery, ophthalmology, ... En savoir plus

Introduction: Flat lenses require precise control of a phase gradient across an interface, which is enabled through the application of engineered surfaces, such as Metasurfaces [1]. Periodic arrays of plasmonic antennas have been utilized to generate this desired phase gradient, which ... En savoir plus

This work presents the analysis of a wireless power transfer system consisting of two coupled coils and ferrite slabs acting as flux concentrators. The study makes use of Finite Element Method (FEM) simulations to predict the key performance indicators of the system such as coupling, ... En savoir plus

In Mexico there is a decline in the production of oil deposits due to the lack of effective treatment of oil emulsions, which generate a problem in the reinjection of emulsified water, transport of oil with high water content and corrosion in the oil refineries. Through the simulation ... En savoir plus

Optical tweezers work on the idea of non-contact Optical Pressure felt by transparent particles, when shined by coherent light source such as lasers. On the other hand when light falls on the metal it excites the electron inside it and make them free. When these free electron cloud ... En savoir plus

In a magnetic resonance imaging (MRI) system, it is necessary to excite the nuclei of a patient into coherent precession for imaging. This requires a coupling between the nuclei and a source of radio frequency (RF) power using a transmitter. To receive a meaningful signal, we also need ... En savoir plus

The remarkable power scaling of high power fiber lasers over the past years has become more and more challenging, because the effects of transverse mode instability (TMI) and photodarkening (PD) of the fiber are limiting the effective output power of typical industrial fiber lasers. The ... En savoir plus