Articles techniques et présentations

Recherche rapide

Ressources

Livres Blancs

Voyez comment la modélisation et la simulation sont utilisées par les industries La modélisation et la simulation multiphysiques pilotent l'innovation dans tous les grands secteurs d'activité et dans le monde universitaire — comme en témoignent les nombreuses utilisations présentées dans des articles et des posters techniques présentés par des ingénieurs, chercheurs et scientifiques à la Conférence COMSOL chaque année. Inspirez-vous des récents proceedings réunis ci-dessous, ou, pour trouver les présentations les plus intéressantes dans votre domaine d'intérêt, utilisez la recherche rapide.

Consultez les proceedings de la Conference COMSOL 2024

Terme recherché:

Single-Phase Modeling in Microchannel with Piranha Pin Fin

X. Yu [1], C. Woodcock [1], Y. Peles [2], J. Plawsky [1],
[1] Rensselaer Polytechnic Institute, Troy, NY, USA
[2] University of Central Florida, Orlando, FL, USA

Microchannel has shown potential to dissipate high heat flux in past years [1][2]. At the same time, liquid cooling attracts more and more attention from researchers for its favorable thermal properties and ability to cool down hot and keep acceptable system temperature [3][4][5]. This ... En savoir plus

Transport, Growth, Decay and Sorption of Microorganisms and Nutrients through Porous Media: A Simulation with COMSOL

D. Lopez-Falcon, M. Diaz-Viera, and A. Ortiz-Tapia
Instituto Mexicano del Petroleo, México D.F., Mexico

Transport of microorganisms through porous media governs many phenomena in bioremediation of environmental pollution problems and microbial enhanced oil recovery. The aim of this work is to investigate the effects of some transport parameters on breakthrough curves as well as on spatial ... En savoir plus

Simulating Microbubble Flows Using COMSOL Multiphysics

X. Chen[1], and S. Ghadiali[1,2]

[1]Mechanical Engineering and Mechanics, Lehigh University, Bethlehem, PA, USA
[2]Bio Engineering program, Lehigh University, Bethlehem, PA, USA

Acute respiratory distress syndrome (ARDS) is a severe lung disease caused by a variety of direct and indirect insults. The main treatment for ARDS is mechanical ventilation. The ventilation of fluid filled lungs involves the propagation of microbubbles over a layer of epithelial cells. ... En savoir plus

Model of a Filament Assisted CVD Reactor

J. Brcka[1]

[1]TEL US Holdings, Inc., Technology Development Center, Albany, New York, USA

In this presentation we are dealing with the computational fluid model of a Filament Assisted Chemical Vapor Deposition (FACVD) reactor. Proposed strategy in this study involved several steps: (a) development a computational model for FACVD process capable to describe and obtain with ... En savoir plus

Depth-Averaged Modeling of Groundwater Flow and Transport

P. Kitanidis
Civil and Environmental Engineering, Stanford University, Stanford, CA, USA

In many groundwater studies, the areal extent of an aquifer is much larger than its thickness so that flow and transport take place primarily in horizontal directions. Thus, the most common type of modeling in practical applications is two-dimensional involving vertically averaged ... En savoir plus

A Pragmatic Multiphysics Numerical Model for Melt Hydrodynamics in Selective Laser Melting

Shashank Sharma [1], J. Ramkumar [1],
[1] Indian Institutes of Technology Kanpur, Kanpur, Uttar Pradesh, India

This study explores the significance of the recoil pressure, Marangoni convection and surface tension effects in selective laser melting of Ti-6Al-4V. A pragmatic two dimensional model with appropriate powder distribution over a substrate of finite thickness has been developed in COMSOL ... En savoir plus

The Use of Multiphysics Modeling in the Steel Industry

Filip Van den Abeele
Simulation Expert, OCAS, Belgium

OCAS is a joint venture between ArcelorMittal and the Flemish Region. She uses COMSOL Multiphysics for the following: Enamel solidification Magnetic Pulse Forming Electromagnetic modelling of electric machines Vortex Induced Vibrations Model Identification for Orthotropic Materials and ... En savoir plus

Solid Hydrogen Extrusion Modeling

N. Luchier [1], S. Michaux [1], D. Chatain [1],
[1] DRF/INAC/SBT, CEA-Université Grenoble Alpes, Grenoble France

The Service des Basses Températures of CEA-Grenoble has developed a cryostat able to produce solid hydrogen ribbons of thickness between 50 and 100 µm. These ribbons are intended to be used in high-power laser facilities to study proton-laser interactions. The current developments are ... En savoir plus

An Original Way of Using COMSOL Multiphysics® Application Builder to Enhance Simulation of Laser Welding

Y. A. Mayi¹, M. Dal¹, P. Peyre¹, M. Bellet², C. Metton³, C. Moriconi³, R. Fabbro¹
¹Laboratoire PIMM, Arts et Metiers, Paris, France
²CEMEF, MINES ParisTech, Sophia Antipolis, France
³Safran Additive Manufacturing, Paris, France

The present work introduces a new methodology, based on COMSOL Multiphysics® Application Builder, to account for the “beam trapping” effect in multiphysical modelling of laser welding. Incident intensities involved in laser welding processes are high enough to induce material ... En savoir plus

Solar Cell Cooling and Heat Recovery in a Concentrated Photovoltaic System

M. Cozzini[1]
[1]Fondazione Bruno Kessler (FBK), Renewable Energies and Environmental Technologies (REET) Unit, Trento, Italy

Concentrated photovoltaic systems with high efficiency solar cells are being widely investigated, aiming at improving the cost-efficiency balance in the solar energy field. Different cell types are in use: e.g., high concentration triple junction cells, reaching efficiencies of the order ... En savoir plus

Premier

761–770 of 1391

Dernier