Articles techniques et présentations

A novel injection molding tool temperature control system based on heat pipes is being researched at the Bielefeld University of Applied Sciences and Arts (HSBI). This temperature control technology offers great potential for improving product quality and saving energy in the production ... En savoir plus

Fluidized Catalytic Cracking (FCC) regenerators utilize a fluidized bed to facilitate catalyst regeneration. Cyclones are used to separate the catalyst from the gas stream and return the catalyst to the fluidized bed; as the gas progresses through the system for further processing. This ... En savoir plus

Laser-based powder bed fusion (LPBF) is a promising additive manufacturing technology, where metallic parts are produced in a layer-wise manner. At each step, a rapid-moving laser irradiates and subsequently melts predefined zones of a relatively thin layer of fine spherical metal ... En savoir plus

The Geoenvironmental Engineering Group of the University of Castilla-La Mancha is developing a computational tool, M4B, for describing the influence of environmental loads on the deformation behavior of soils and its interaction with building foundations. This tool comprises a set of ... En savoir plus

Metal reed valves are used for flow rectification in electrohydraulic pumps driven by smart materials at high frequencies but it is difficult to predict their behavior when the surrounding fluid has considerable inertia and viscosity. Simulation of this phenomenon involves modeling the ... En savoir plus

Topology optimization of conjugate heat transfer problems is an relatively intricate problem due to the coupled nature of Navier-Stokes equation, continuity equation and energy equation. In any density based topology optimization code, the major parts are finite element analysis, ... En savoir plus

High temperature variations inside a tent can be a problem for campers’ thermal comfort. To increase user comfort, Decathlon has tents called "Fresh & Black (F&B)". The main improvement of this equipment lies in the textile technology, regulating the temperature inside and ... En savoir plus

: One of the most commonly used techniques for quantification of beating forces exerted by cardiomyocytes is culturing them on a bed of vertical microcantilevers or microposts. The position of the microcantilevers is observed through advanced imaging techniques and the displacements are ... En savoir plus

The present work deals with dynamic simulation of magnetic particles present in the carrier fluid when subjected to external magnetic field. Magneto rheological fluid comes under classification of smart materials, which contain pure CI iron particles, silicon oil as carrier fluid and ... En savoir plus

Cantilever vibration in fluid environment is probably one of the most common Fluid Structure Interaction problems in the field of Micro/Nano Electro Mechanical Systems. Usually the effect of fluid on cantilever oscillation is characterized in terms of mode resonance frequencies and ... En savoir plus